Bedienungsanleitung Klipsch SLX (Seite 2 von 4) (Englisch)

588356

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

SYNERGY SERIES

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wider blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

This symbol indicates that there are important operating and maintenance instructions

in the literature accompanying this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit.

WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain

or moisture.

WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside.

Refer all ser

vicing to qualified ser

vice personnel.

CAUTION: Changes or modifications not expressly approved by the manufacturer could void the

user’

s authority to opera

te this device.

ABOUT YOUR KLIPSCH PURCHASE

Thank you f

or your purchase of Klipsch speakers.

After reading this manual and connecting your

system,

you will hear the result of over 55 years of stringent engineering and class-leading

research and development.

Like all Klipsch products,

your speakers fea

ture Klipsch Horn-loaded

echnolog

y—the guiding design f

or the first Klipschorn

developed in 1946 and f

or ever

product tha

t has followed. Horn-loading allows your speakers to deliver high sensitivity, low

distortion,

t frequency response and wide dispersion,

which transla

tes to unequaled power

detail and dynamics,

the hallmarks of

“The Klipsch Sound.”

Please be sure to fill out the

included

Warranty card or register online at www.klipsch.com so we are better able to serve

you.

Again,

thank you f

or choosing Klipsch and we hope tha

t your speakers bring life to your

music and movies f

or man

y years.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

GRILLE

The speaker can be used with or without its grille in place. The grille attaches magnetically;

you can remove the grille easily by pulling it forward and replace it simply by lining up its

edges with the those of the speaker cabinet.

The logo badge on the grille can be removed, rotated 90 degrees and replaced for proper ori-

entation when using the SLX in a horizontal position. To remove the logo badge, simply push

the two pins on the rear of the logo badge together and push it out of its location on the grille.

To reinsert it, align the two pins with the hole in the grille and push the logo badge into place

(making sure the orientation of the logo badge is correct).

PLACEMENT

Your Synergy SLX speakers are designed for maximum flexibility and will perform well in a

wide variety of configurations. Figure 1 shows a typical home theater setup, with a center-

channel speaker (Synergy SLX) mounted below (or above) a flat panel tv, left and right front

speakers (Synergy SLX) flanking the screen, and another pair of speakers (Synergy SLX) to the

sides of the listening area for the main surrounds. Below are specific placement recommenda-

tions for each function.

Center-Channel Speaker: Center the speaker directly above or below your tv and mount it on

the wall (see wall mounting instructions). When using the supplied mounting bracket, each

Synergy SLX can be rotated 30° (15° in each direction) to obtain optimal directivity toward the

listening area.

Front Left and Right Speak

ers:

The front left and right speakers should be a

pproxima

tel

y in

line with your tv and equidistant from it. The distance from the tv is not critical, though wide

separa

tion will tend to make the sound more spacious.

void ha

ving either speaker closer than

2 feet to a side wall.

Place them a

t sea

ted ear height if tha

t is practical. When using the

supplied mounting bracket, each Synergy SLX can be rotated 30° (15° in each direction) to

obtain optimal directivity toward the listening area.

Left and Right Surround Speakers: Using Synergy SLX’s as surround speakers ensures an

acoustic and cosmetic ma

tch to the front left,

right and center speakers.

The best loca

tion f

speakers employed as surround speakers is on or a

gainst the walls to the sides of the sea

ting

area, anywhere from adjacent to the listening position to about 20º behind it. Mount them

bove the ear height of sea

ted listeners (5’-7’ high) but a

void placing them up a

gainst or on

the ceiling.

Aim them straight across the room or back slightl

y toward the rear wall f

or a more

diffuse sound or toward the listening position for a more direct sound. The design of the

Synerg

y SLX allows g

rea

t f

lexibility and good results can be achieved with configura

tions tha

depart significantl

y from the ideal.

When using the supplied mounting bracket, each Synergy

SLX can be rotated 30° (15° in each direction).

Surround Bac

k Speak

ers:

If your electronics support Dolb

y Dig

ital EX, THX Surround EX, or

DTS-ES 7.1 or 6.1-channel surround, you can place one or two speakers behind the seating

area to ser

ve as surround back speakers.

As with the left and right surrounds,

the optimum

loca

tion is a

bove seated ear level. If you are using just one back surround speaker, it should be

centered behind the listening area; if you are using two, they should be spaced fairly close

together

With this type of system,

the regular left and right surrounds should be loca

ted

adjacent to the sea

ting area rather than behind it.

FLAT

PANEL

Optional

sub

Figure 1

ENGLISH

Klipsch SLX Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info