Bedienungsanleitung Klipsch THX ULTRA2 IN-WALL (Seite 3 von 20) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

588378

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

THX Ultra2 7.1 surround systems utilize a surround back channel

in addition to the traditional side surrounds. When configuring

such a system it is suggested to use KL-7800 speakers in the

surround back location.

Speaker Installation (for New Construction, skip to step #3)

1. Cut the appropriate size opening in the wall using the

template provided. If the template is not available, cutout

dimensions are provided on the Klipsch website, at

www.klipsch.com. Sizes listed are minimum. If accuracy of

cut cannot be achieved, you may add 1/4" to each dimension.

Be careful not to cut through any existing wiring or plumbing.

Avoid compromising any fire stops between studs.

2. Run speaker wiring (18 gauge minimum) to the openings. Be

sure to comply with all building codes in your area.

3. Attach the wire to the speaker using the wire’s color coding or

markings as a guide to maintain proper polarity.

4.Insert the speaker assembly into the opening and attach by

tightening the six Phillips screws (see illustration). The frame’s

six “dogs” will swivel out and “sandwich” the wall and frame

together as they are tightened. If you use a power tool to tighten

these screws, please use a low torque setting. Failure to do so

could result in damage to your speaker (Refer to Figure 3)

5. At this point, you may paint the speaker grille before attaching

it to the speaker. Klipsch speakers and grilles are designed to

accept most types of paint. Use the supplied clear paint shield to

protect the speaker baffle and drivers when painting the bezel of

the speaker. Care should be taken to avoid excessive paint build-

up in the grille perforations. Please remove the scrim material

attached to inner surface of the grille by carefully peeling it out

prior to painting. Reinstall scrim after the paint on the grille

is dry.

6. Press the grille into place.

WARRANTY—U.S. AND CANADA ONLY

The Warranty below is valid only for sales to consumers in the

United States or Canada.

KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free

from defects in materials and workmanship (subject to the terms

set forth below) for a period of five (5) years from the date of

purchase. During the Warranty period, KLIPSCH will repair or

replace (at KLIPSCH’s option) this product or any defective parts

(excluding electronics and amplifiers). For products that have

electronics or amplifiers, the Warranty on those parts is for a

period of two (2) years from the date of purchase.

To obtain Warranty service, please contact the KLIPSCH

authorized dealer from which you purchased this product. If

your dealer is not equipped to perform the repair of your

KLIPSCH product, it can be returned, freight paid, to KLIPSCH for

repair. Please call KLIPSCH at 1-800-KLIPSCH for instructions.

You will need to ship this product in either its original packaging

or packaging affording an equal degree of protection.

Proof of purchase in the form of a bill of sale or receipted

invoice, which is evidence that this product is within the Warranty

period, must be presented or included to obtain Warranty service.

This Warranty is invalid if (a) the factory-applied serial number

has been altered or removed from this product or (b) this product

was not purchased from a KLIPSCH authorized dealer. You may

call 1-800-KLIPSCH to confirm that you have an unaltered serial

number and/or you purchased from a KLIPSCH authorized dealer.

This Warranty is only valid for the original purchaser and will

automatically terminate prior to expiration (if applicable) if this

product is sold or otherwise transferred to another party.

This Warranty does not cover cosmetic damage or damage due

to misuse, abuse, negligence, acts of God, accident, commercial

use or modification of, or to any part of, the product. This

Warranty does not cover damage due to improper operation,

maintenance or installation, or attempted repair by anyone other

than KLIPSCH or a KLIPSCH dealer which is authorized to do

KLIPSCH warranty work. Any unauthorized repairs will void this

Warranty. This Warranty does not cover product sold AS IS or

WITH ALL FAULTS.

REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS

WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER.

KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR

IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE

EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE

AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WAR-

Figure 2

Figure 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Klipsch THX ULTRA2 IN-WALL Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info