466552
95
Zoom out
Zoom in
Vorherige Seite
1/143
Nächste Seite
www.kodak.com/go/aiosupport 87
Kodak ESP 9 All-in-One printer
Upgrading the printer software - for Windows
You can upgrade the software and firmware for in your All-in-One printer with the
most recent release available. This requires an Internet connection.
NOTE: The firmware cannot be upgraded when your All-in-One printer is
connected via a network or Wi-Fi. Your All-in-One printer must be
connected to the computer with a USB cable in order to perform a firmware
upgrade.
1. If your connection is via Ethernet, disconnect the Ethernet cable. If your
connection is via Wi-Fi, press
Menu. Navigate to Network Settings menu and
press
OK. Select WIFI Radio off.
2. Connect the printer to the computer with a USB cable. The computer must be
connected to the internet.
3. A pop-up window appears at the bottom right corner of your computer monitor
stating “Found New Hardware KODAK ESP 9 AIO,” then it will change to “Found
New Hardware. Your new hardware is installed and ready to use.
4. Open the Kodak AiO Home Center.
5. Click the
Help button to open the Help Panel.
6. Under the General Links, click
Maintenance. If there is an update available, you
will receive a pop-up window or you can click on
Firmware Upgrade.
7. Click
OK to upgrade. The printer software will begin to load. Do not turn off your
printer while the update is in progress.
8. When the update is complete click
OK.
9. Close the maintenance window. The printer firmware is updated.
10. Next you will update the Home Center software, as well as the printer and
scanner drivers.
11. Under the
Web Links on the Help Panel, click on Check for updates.
12. If an update is available, download it to your computer.
13. When the update is complete, disconnect the USB cable and reconnect your
printer to the Ethernet or Wi-Fi network.
14. Use the
Windows Control Panel to delete the printer from your computer. The
USB printer is named: Kodak ESP9 AiO. This will remove the USB drivers.
95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kodak ESP 9 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kodak ESP 9

Kodak ESP 9 Bedienungsanleitung - Holländisch - 171 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info