7
Reilling Photo Paper
– Only load a single pack of 10 papers and the corresponding blue Color Calibration Sheet in the printer
at one time when the printer is empty. The Color Calibration Sheet will be processed automatically at
the start of each paper pack, calibrating the printer for that speciic paper.
Paper Do’s & Don’ts
– Do not add more paper until the paper compartment is completely empty.
– Do not ill the paper compartment with more than one 10-pack of KODAK ZINK Photo Paper.
Filling over 10 sheets can damage the printer.
– Do not bend the KODAK ZINK Photo Paper.
– Do hold the paper by its edges. Avoid touching the surface with your ingers.
– When not in use, store KODAK ZINK Photo Paper at temperatures between 68°F and
77°F (20°C and 25°C).
– If you inserted the wrong type of paper or if there is a paper jam or some other related error, all
indicators will blink red. Open your camera and correct the error (clear jam, replace paper, etc.) and
then restart your camera.
Picture Modes
– Photos will automatically print in full color. To print in black and white, use the color mode switch
located on the top of your camera to switch to the black and white mode.
Memory
– Your KODAK PRINTOMATIC is designed to capture and print immediately, and can hold up to 3 images
at a time. To save your pictures use an external microSD™ card to extend its memory capacity.
Inserting a microSD™ Card Memory Indicator
– Your KODAK PRINTOMATIC accommodates a 32GB microSD™ card. Gently slide the card into the slot
at the bottom of your camera. You will feel a slight click when the card is fully inserted and the
microSD™ card LED light will glow white.
Removing a microSD™ Card Memory Indicator
– Push on the top of the card to release it. Gently pull to fully remove the card from the camera.
Removing a microSD™ Card Memory Indicator
– When the memory on your microSD™ card dips below 1GB, reaches zero, or if there is an error reading
the card, the LED indicator will blink red.
Transferring Files to Your Computer
– Via USB Cable:
Using the included micro USB cable, connect your KODAK PRINTOMATIC to a computer. Double-click
the memory card image when it appears on your computer desktop to view and save your images.
