Bedienungsanleitung Kodak ZX3 (Seite 19 von 23) (Englisch)

463638

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Appendix

www.kodak.com/go/playsportsupport 19

■ The camera will not float. Use the strap at all times.

■ If water has entered the camera, remove the battery/card. Allow all components to

air-dry for at least 24 hours before using the camera.

■ If the camera was used in chemically treated water or saltwater, rinse it in fresh water,

then use a soft towel to dry it.

■ Wipe off dirt or sand from the door seals—debris could compromise the seal and cause

a leak in water.

■ Do not subject the camera to temperatures lower than 0 (32° F) or higher than 40° C

(104° F) for an extended time—the integrity of the seals may be compromised. Wait

until camera reaches operating temperature before using.

■ Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,

lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless

designed specifically for camera lenses. Do not allow chemicals, such as suntan lotion,

to contact painted surfaces.

■ Service agreements may be available in your country. Contact a dealer of KODAK

Products for more information.

■ For camera disposal or recycling information, contact your local authorities. In the US,

go to the Electronics Industry Alliance Web site at www.eiae.org or go to Kodak at

www.kodak.com/go/support.

Limited Warranty

Kodak warrants its digital cameras and accessories (excluding batteries) to be free from

malfunctions and defects in both materials and workmanship for the warranty period

specified on your KODAK Product packaging. Retain the original dated sales receipt. Proof of

purchase date is required with any request for warranty repair.

Limited warranty coverage

Warranty service is only available from within the country where the products were originally

purchased. You may be required to ship products, at your expense, to the authorized service

facility for the country where the products were purchased. Kodak will repair or replace

products if they fail to function properly during the warranty period, subject to any conditions

and/or limitations stated herein. Warranty service will include all labor as well as any

necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a

product, Kodak will, at its option, refund the purchase price paid for the product provided

the product has been returned to Kodak along with proof of the purchase price paid. Repair,

replacement, or refund of the purchase price are the sole remedies under the warranty. If

replacement parts are used in making repairs, those parts may be remanufactured, or may

contain remanufactured materials. If it is necessary to replace the entire product, it may be

replaced with a remanufactured product. Remanufactured products, parts and materials are

warranted for the remaining warranty term of the original product, or 90 days after the date

of repair or replacement, whichever is longer.

Limitations

This warranty does not cover circumstances beyond Kodak’s control. This warranty does not

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kodak ZX3 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kodak ZX3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info