Bedienungsanleitung Koenic KAC 3231 (Seite 25 von 34) (Deutsch, Englisch)

782557

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

English

Installation

Placement

When choosing an installation place, consider

following points:

• Observe all safety warnings!

• Ensure the minimum surrounding distance

in every direction of 30 cm and 100 cm to

other electrical products.

• Keep a surrounding distance of minimum

50 cm around the outside of exhaust wall

outlet and protect it from entering objects

and moisture.

• Make sure the wall behind the product is an

exterior wall not a divider and the drill holes

can be made in a safe way, not obstructed

by hidden objects in the wall.

• Ensure that a suitable power outlet is within

reach at the desired location and remains

accessible after installation.

• Consider that during dehumidifying

operation water is collected inside the

product, which must be continuously drained

through a connected drainage hose into a

suitable container or a nearby drain.

• Ensure there are no obstacles obstructing

the airﬂow.

Air exhaust

The exhaust hose and adaptor must be

installed or removed in accordance with the

usage mode:

• COOL, AUTO mode: install exhaust hose

• FAN, DEHUMIDFY mode: remove exhaust

hose

Wall mounting (Part: N, O, P)

Fig. 1 Screw the wall adapter and exhaust

adapter onto each side of the exhaust

hose. Connect the exhaust adapter to

the air exhaust of the product.

Fig. 2 Use the wall duct as pattern to mark the

hole spacing on the wall. Drill the holes

with a suitable power tool. Free the

holes from dust and mount the wall

duct using supplied screws and plugs.

Connect the wall connector to the wall

adaptor.

Window installation (Part: N, O, Q)

Fig. 3 The exhaust hose can be attached to

an open or tilted window alternatively.

Screw the window outlet adapter onto

the open end of the exhaust hose.

Note:

• The exhaust hose can be expanded and

compressed, but for optimal performance,

keep the exhaust length to a minimum.

• Do not extend the exhaust hose.

• Avoid over-bending.

• Observe the decommissioning instructions

in the respective section, if the product is

not to be used for a longer period of time.

• Material necessary for attachment and

sealing is not provided but must be

purchased in special shops

Drainage hose

The drainage hose is used to drain water from

the upper drain outlet.

Fig. 4 Remove the rubber plug from the upper

drainage outlet and slide the drainage

hose as far as possible onto the outlet.

Lead the other end of the drainage hose

into a suitable container or a nearby drain.

Note:

• Depending on the set modus the water

is either drained directly or collected in an

internal tank. Drain the water respectively.

• Attach the open end of the drainage hose

to the drainage hose holder, when not in

use.

• Always cover the drain outlets when not

in use.

• Observe the decommissioning

instructions in the respective section, if

the product is not to be used for a longer

period of time.

IM_KAC3231_161201_V06_HR.indb 25 1/12/16 4:21 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Koenic KAC 3231 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Koenic KAC 3231

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info