Bedienungsanleitung Koenic KAC 3231 (Seite 28 von 34) (Deutsch, Englisch)

782557

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

English

Fig. 9 Air outlet adjustment

The air outlet can be adjusted in any mode to

ﬁt required needs.

• Press the oscillation button SWING

repetitively to turn oscillation on or o. The

air ﬂap will oscillate continuously.

• To stop the air ﬂap at a desired position

press button SWING again.

Note:

Do not move, open or shut the air ﬂap

manually.

Fig. 10 Setting the timer

The timer switches the product on or standby

when a user-deﬁned time has elapsed. When

switching on, the last mode and setting will be

used.

The set durations will be counted down

immediately after the input without correlation

to the contrary time setting.

• Press the timer program button TIMER at

the product or the speciﬁc TIME ON/OFF

button at the remote control to enter timer

setting for either the auto-on or auto-o

timer. The respective indicator for each

setting will light up.

• Press the + / – buttons or the speciﬁc TIME

ON/OFF button at the remote control as

often as necessary to set a time from 0.5 to

24 hours.

• The setting will be saved in the product

after 5 seconds without input.

Note:

The indicator lights are on when the timer is

activated.

Examples:

• To have the product switched standby after

1 hour and on again after another 1½ hours,

set the auto-o time to 1.0 h and the auto-

on time to 2.5 h during operation.

• To have the product switched on after 8

hours and standby after another 8 hours,

set the auto-on time to 8.0 h and the auto-

o time to 16.0 h while in standby.

Timer On

Timer O

Timer

mode

•switches the product on

and / or into standby at a

user-deﬁned time

Sleep

mode

•set temperature

increases by 1 °C after

30 minutes and again

by 1 °C after another 30

minutes

•temperature will be kept

for the next 7hours and

the product returns then

to the previously set

temperature

•not available during fan

or dehumidifying mode

The product is intended for the following

ambient temperatures:

Mode Temperature

AUTO auto 17 °C (62 °F) - 35 °C (95 °F)

COOL 17 °C (62 °F) - 35 °C (95 °F)

DRY 13 °C (55 °F) - 35 °C (95 °F)

Warning

Any other conditions and locations as the

mentioned above may result in reduced

performance of the product, injuries and

damage to property.

Fig. 7 Setting the temperature

Press the / + or / – button to select a

temperature between 17 °C to 30 °C.

Fig. 8 Setting the fan speed

• Press the fan speed button FAN to toggle

between the speed settings.

• The respective indicator on the control panel

and the remote control show the current

setting.

Note:

There is no indicator for the auto speed

setting.

IM_KAC3231_161201_V06_HR.indb 28 1/12/16 4:21 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Koenic KAC 3231 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Koenic KAC 3231

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info