Bedienungsanleitung Koenic KVC 3121 A (Seite 17 von 66) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

782633

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

English

Cleaning and care

Warning!

• When cleaning, never use solvents or

abrasive materials, hard brushes, metallic

or sharp objects. Solvents are harmful to

human health and can attack plastic parts,

while abrasive cleaning mechanisms and

tools may scratch the surface(s).

• Never immerse any electrical parts of the

product in water or in other liquids during

cleaning. Never place it under running

water.

Emptying the dust canister (Part O)

Fig. 15 If the suction power diminishes, the dust

canister must be emptied and the ﬁlters

must be cleaned. We recommend to

empty the dust canister outside of the

house.

a) Remove the suction hose from the

dust canister. Press the unlocking

device and remove the ﬁlter by bringing

it forward.

b) To empty the dust canister, simply

press the release on the bottom so

that the bottom of the canister opens

and the dust falls out. Hold the dust

canister over a rubbish container whilst

you are emptying it.

c) Loosen the ﬁlter lid and remove the

entire ﬁlter insert from the dust

canister. Empty the remain dusty from

the dust canister.

d) Re-assemble all of the components

that have previously been removed.

Assembly is carried out in reverse order.

Cleaning the main ﬁlter

Fig. 16 a) Loosen the ﬁlter lid and remove the

entire ﬁlter insert from the dust

canister. Break down the ﬁlter into all

of its individual parts. Tap the ﬁlter to

remove the dust and clean all parts

with water and dry them thoroughly.

b) Re-assemble all of the components

that have previously been removed.

Assembly is carried out in reverse

order.

Cleaning the motor ﬁlter

Fig. 17 Remove the motor ﬁlter and tap it

to remove the dust. Then re-insert it.

Reassemble all of the components

that have previously been removed.

Assembly is carried out in reverse order.

Warning!

Never use the vacuum cleaner without a

motor ﬁlter, as otherwise, the motor will soon

get dirty and will be subject to wear. If the

motor ﬁlter gets dirty, the suction power will

diminish.

Cleaning the exhaust air ﬁlter

Fig. 18 Open the ﬂap, take the ﬁlter out and

tap it to remove the dust. Assembly is

carried out in reverse order. Insert the

ﬁlter in the right direction so that the

correct side is facing the motor.

Technical data

Rated Voltage : 220 - 240 V~, 50/60 Hz

Rated input power : 700 W

Protection class : II

• This is a general purpose vacuum cleaner

• The Erp test method is according to (EU)

No 666/2013, (EU) No 665/2013 & EN

60312:2013

• Please refer to below website for detail

technical information, or contact us for

technical document:

www.koenic-online.com

IM_ KVC3121A_160426_V02_HR.indb 17 26/4/16 2:09 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Koenic KVC 3121 A Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info