Bedienungsanleitung Koenic KVC 3122 A (Seite 12 von 66) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

782634

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Size - A5

English

Emptying the dust canister

Fig. 15 If the suction power diminishes, the dust

canister must be emptied and the ﬁlters

must be cleaned. We recommend to

empty the dust canister outside of the

house.

a) Remove the suction hose from the

vacuum cleaner. Press both dust

container release buttons and remove

the container by bringing it forward.

b) To empty the dust canister, simply

press the release on the bottom so

that the bottom of the canister opens

and the dust falls out. Hold the dust

canister over a rubbish container

whilst you are emptying it.

c) Loosen the ﬁlter lid and remove the

entire ﬁlter insert from the dust

canister. Empty remaining dust from

the dust canister.

d) Re-assemble all of the components

that have previously been removed.

Assembly is carried out in reverse order.

When put in the ﬁlter insert, be aware

that the arrow of the ﬁlter points to

the handle of the container.

Cleaning the main ﬁlter

Fig. 16 a) Loosen the ﬁlter lid and remove the

entire ﬁlter insert from the dust

canister. Break down the ﬁlter into

all of its individual parts. Tap the

ﬁlter to remove the dust and clean all

other parts with water and dry them

thoroughly.

b) Re-assemble all of the components

that have previously been removed.

Assembly is carried out in reverse

order. When inserting the ﬁlter insert,

be aware that the arrow of the ﬁlter

points to the handle of the container.

Cleaning the motor ﬁlter

Fig. 17 Remove the motor ﬁlter and tap it

to remove the dust. Then re-insert it.

Reassemble all of the components

that have previously been removed.

Assembly is carried out in reverse order.

Warning!

Never use the vacuum cleaner without a motor

ﬁlter, as otherwise, the motor will soon get

dirty and will be subject to wear. If the motor

ﬁlter gets dirty, the suction power will diminish.

Cleaning the exhaust air ﬁlter

Fig. 18 Open the ﬂap, take the ﬁlter out and

tap it to remove the dust. Assembly is

carried out in reverse order. Insert the

ﬁlter in the right direction so that the

correct side is facing the motor.

Troubleshooting

If there are any problems during operation, please refer to the following table. If problems cannot

be solved as indicated under Solution, please contact your retailer.

Problem Possible causes Solution

Product does not work Interrupted power supply Check the power supply

Product cannot absorb

dust or loses suction

power

•Filters are blocked with dirt

•Dust container full

•Suction hose/ telescopic tube

blocked with dirt

•Clean and wash all ﬁlters

•Empty dust container

•Clean and wash the suction

hose/telescopic tube

IM_KVC3122_180608_V04_HR.indb 12 8/6/18 9:46 am

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Koenic KVC 3122 A Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info