Bedienungsanleitung Koenic KVC 71521 (Seite 12 von 62) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

782636

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Size - A5

English

Emptying the dust canister

If the suction power diminishes, the dust canister

must be emptied and the ﬁlters must be cleaned.

We recommend to empty the dust canister

outside of the house.

Fig. 15 Press the dust container release button

and remove the container.

Fig. 16 To empty the dust container, simply

press the release on the bottom so

that the bottom of the container opens

and the dust falls out. Hold the dust

container over a rubbish container whilst

you are emptying it.

Fig. 17 Loosen the ﬁlter lid and remove the

entire ﬁlter insert from the dust

container. Empty remaining dust from

the dust container.

Fig. 18 Re-assemble all of the components

that have previously been removed.

Assembly is carried out in reverse order.

When inserting the upper ﬁne ﬁlter,

make sure that the white ﬁne ﬁlter

points upwards towards the top cover.

Cleaning the main ﬁlter

Fig. 19 Loosen the ﬁlter lid and remove the

entire ﬁlter insert from the dust

canister. Break down the ﬁlter into

all of its individual parts. Tap the

ﬁlter to remove the dust and clean all

other parts with water and dry them

thoroughly.

Fig. 20 Re-assemble all of the components

that have previously been removed.

Assembly is carried out in reverse order.

When inserting the upper ﬁne ﬁlter,

make sure that the white ﬁne ﬁlter

points upwards towards the top cover.

Cleaning the motor ﬁlter

Fig. 21 Remove the motor ﬁlter and tap it

to remove the dust. Then re-insert it.

Reassemble all of the components

that have previously been removed.

Assembly is carried out in reverse order.

Warning

Never use the vacuum cleaner without a motor

ﬁlter, as otherwise, the motor will soon get

dirty and will be subject to wear. If the motor

ﬁlter gets dirty, the suction power will diminish.

Cleaning the exhaust air ﬁlter

Fig. 22 Open the ﬂap, take the ﬁlter out and

tap it to remove the dust. Assembly is

carried out in reverse order. Insert the

ﬁlter in the right direction so that the

correct side is facing the motor.

Troubleshooting

If there are any problems during operation, please refer to the following table. If problems cannot

be solved as indicated under Solution, please contact your retailer.

Problem Possible causes Solution

Product does not work • Interrupted power supply • Check the power supply

Product cannot absorb

dust or loses suction

power

• Filters are blocked with dirt

• Dust container full

• Suction hose/ telescopic tube

blocked with dirt

• Clean and wash all ﬁlters

• Empty dust container

• Clean and wash the suction

hose/telescopic tube

IM_KVC71521_200813_V04_HR.indb 12IM_KVC71521_200813_V04_HR.indb 12 13/8/2020 4:27 PM13/8/2020 4:27 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Koenic KVC 71521 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info