Bedienungsanleitung Koenic KWDR 10712 B INV (Seite 43 von 48) (Deutsch, Englisch)

782841

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

English

Cleaning and care

Warning

• When cleaning, never use solvents or

abrasive materials, hard brushes, metallic

or sharp objects. Solvents are harmful to

human health and can attack plastic parts,

while abrasive cleaning mechanisms and

tools may scratch the surface(s).

• Switch o the appliance and let it cool

down completely before cleaning.

• Clean the exterior surfaces of the product

with a slightly damp cloth and dry them

well. Make sure that no water enters the

product interior (e.g. at the switch).

Fig. 11 Cleaning the detergent drawer

• Pull out the drawer. Press the tab

marked with an arrow above the

fabric softener compartment and

pull out the drawer completely.

• Wash the chambers with water.

• If necessary, use a soft brush to

clean the housing.

• Insert the detergent drawer.

Fig. 12 Clean the ﬁlter of the lye pump

Caution

• Never operate the appliance without a

ﬁlter.

• The ﬁlter of the lye pump prevents

foreign objects from entering and possibly

damaging the pumping system.

• Clean or check the ﬁlter regularly

depending on the frequency of use,

approximately once a month.

• Check the ﬁlter if the water is not

pumped out or if the noise is increased

during pumping.

• Before opening the service ﬂap, place

a big cloth in front and below the ﬂap.

Large amounts of water may leak when

removing the ﬁlter.

• Make sure that all water has been

pumped out during the previous

wash cycle, then turn o the power

and unplug the power cord.

• Open the maintenance ﬂap.

• Place a big piece of cloth and a

collecting tray in front of the service

ﬂap to catch any leaking water.

• Turn the ﬁlter cover to the left.

Catch leaking water!

• Clean the ﬁlter under running water

and remove any foreign objects.

• Insert the ﬁlter and turn it to the

right. Make sure that the ﬁlter is

properly ﬁxed so that no water can

leak.

• Close the maintenance ﬂap.

Fig. 13 Clean the inlet ﬁlter

Caution

• Close the water supply!

• After cleaning, always make sure that the

water hose is properly installed and no

water leaks.

Filter at the water tap

Clean the ﬁlter if there is an insucient

ﬂow of water when the water tap is

open.

• Unscrew the supply hose from the

water tap.

• Wash the inlet ﬁlter under running

water.

• Reconnect the supply hose.

Filter at the washing machine

Clean the ﬁlter regularly, approximately

every three months.

• Unscrew the supply hose on the

back of the unit.

• Clean the ﬁlter with a small brush.

• Reconnect the supply hose and

ensure it’s properly sealed and

doesn’t leak.

IM_KWDR 8622 B INV_10712 B INV_201120_V07_HR.indb 43IM_KWDR 8622 B INV_10712 B INV_201120_V07_HR.indb 43 20/11/2020 11:45 AM20/11/2020 11:45 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Koenic KWDR 10712 B INV Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info