Notice
The PC linkage device is needed to connect the bicycle to a PC. Using E-TUBE PROJECT Professional enables you
to perform a range of tasks, such as customizing individual components or the entire system, or updating
firmware.
Safety precautions
If any malfunction or trouble occurs, consult the place of purchase nearest you.
For any questions regarding methods of installation and maintenance, please contact your place of purchase.
Be sure to attach dummy plugs to any unused E-TUBE ports.
For installation and adjustment of the product, consult the place of purchase.
The components are designed to be fully waterproofed to withstand wet weather riding conditions; however,
do not deliberately place them into water.
Do not clean the bicycle in a high-pressure wash. If water gets into any of the components, operating
problems or rusting may result.
Do not turn the bicycle upside down. There is a risk of damage to the cycle computer and switch unit.
Handle the components carefully, and avoid subjecting them to strong shock.
Although the bicycle still functions as a normal bicycle even when the battery is removed, the light will not
turn on if it is connected to the electric power system. Be aware that using the bicycle under these conditions
will be considered non-observance of the road traffic laws in Germany.
Contact the place of purchase for updates of the component software. The most up-to-date information is
available on the SHIMANO website.
Products are not guaranteed against natural wear and deterioration from normal use and aging.
For maximum performance we highly recommend SHIMANO lubricants and maintenance products.
Connection and communication with PC
PC linkage device: SM-PCE02
E-TUBE PROJECT Professional: PC application
Firmware: Software inside each component
Care and maintenance
Do not use the thinners or harsh solvents to clean the products. Such solvents may damage the surface. When
cleaning the products, use a cloth moistened with a neutral detergent diluted with water.
Labels
Notice
7
