Bedienungsanleitung Kona 2015 (Seite 12 von 40) (Englisch)

780526

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

KONA OWNER’S MANUAL

Once the saddle is at the correct

height, make sure that the seatpost

does not project from the frame

beyond its “Minimum Insertion” or

“Maximum Extension” mark [Fig. 4].

2. Front and back adjustment. The

saddle can be adjusted forward or

back to help you get the optimal

position on the bike. Ask your dealer

to set the saddle for your optimal

riding position and to show you

how to make this adjustment.

If you choose to make your own

front and back adjustment, make

sure that the clamp mechanism

is clamping on the straight part of

the saddle rails and is not touching

the curved part of the rails, and that you are using the

recommended torque on the clamping fastener(s) (see the

manufacturer’s instructions).

3. Saddle angle adjustment. Most people prefer a horizon-

tal saddle; but some riders like the saddle nose angled up

or down just a little. Your dealer can adjust saddle angle

or teach you how to do it. If you choose to make your

own saddle angle adjustment and you have a single bolt

saddle clamp on your seat post, it is critical that you loosen

the clamp bolt sufciently to allow any serrations on the

mechanism to disengage before changing the saddle’s

angle, and then that the serrations fully re-engage before

you tighten the clamp bolt to the recommended torque

(see the manufacturer’s instructions).

WARNING: When making saddle angle adjustments

with a single bolt saddle clamp, always check to

make sure that the serrations on the mating surfaces

of the clamp are not worn. Worn serrations on the

clamp can allow the saddle to move, causing you to

lose control and fall. Always tighten fasteners to the

correct torque. Bolts that are too tight can stretch and

deform. Bolts that are too loose can move and fatigue.

Either mistake can lead to a sudden failure of the bolt,

causing you to lose control and fall.

NOTE:

If your bicycle is equipped with a suspension seat

post, the suspension mechanism may require periodic

service or maintenance. Ask your dealer for recommended

service intervals for your suspension seat post.

Small changes in saddle position can have a substantial

effect on performance and comfort. To nd your best

saddle position, make only one adjustment at a time.

WARNING:

After any saddle adjustment, be sure that

the saddle adjusting mechanism is properly tightened

before riding. A loose saddle clamp or seat post binder

can cause damage to the seat post, or can cause you to

lose control and fall. A correctly tightened saddle adjust-

ing mechanism will allow no saddle movement in any

direction. Periodically check to make sure that the saddle

adjusting mechanism is properly tightened.

If, in spite of carefully adjusting the saddle height, tilt and

fore-and-aft position, your saddle is still uncomfortable, you

may need a different saddle design. Saddles, like people,

come in many different shapes, sizes and resilience. Your

dealer can help you select a saddle which, when correctly

adjusted for your body and riding style, will be comfortable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kona 2015 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info