Bedienungsanleitung Kona 2022 (Seite 16 von 45) (Englisch)

780519

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

KONA OWNER’S MANUAL

WARNING: When making saddle angle adjustments

with a single bolt saddle clamp, always check to

make sure that the serrations on the mating surfaces

of the clamp are not worn. Worn serrations on the

clamp can allow the saddle to move, causing you to

lose control and fall. Always tighten fasteners to the

correct torque. Bolts that are too tight can stretch and

deform. Bolts that are too loose can move and fatigue.

Either mistake can lead to a sudden failure of the bolt,

causing you to lose control and fall.

NOTE:

If your bicycle is equipped with a dropper

or telescoping seatpost, please note that the seatpost

requires periodic service or maintenance. Ask your dealer

for recommended service intervals.

Small changes in saddle position can have a substantial

effect on performance and comfort. To nd your best

saddle position, make only one adjustment at a time.

WARNING:

After any saddle adjustment, be sure that

the saddle adjusting mechanism is properly seated and

tightened before riding. A loose saddle clamp or seatpost

clamp can cause damage to the seatpost, or can cause

you to lose control and fall. A correctly tightened saddle

adjusting mechanism will allow no saddle movement in

any direction. Periodically check to make sure that the

saddle adjusting mechanism is properly tightened.

If, in spite of carefully adjusting the saddle height, tilt and

fore-and-aft position, your saddle is still uncomfortable, you

may need a different saddle design. Saddles are available

in many different shapes and sizes. Your dealer can help

you select a saddle which, when correctly adjusted for your

body and riding style, will be comfortable.

WARNING: Some people have claimed that

extended riding with a saddle which is incorrectly

adjusted or which does not support your pelvic area

correctly can cause short-term or long-term injury to

nerves and blood vessels, or even impotence. If your

saddle causes you pain, numbness or other discomfort,

listen to your body and stop riding until you see your

dealer about saddle adjustment or a different saddle.

C) HANDLEBAR HEIGHT

AND ANGLE

Your bike is equipped with

a “threadless” stem (g.

6), which clamps on to the

outside of the steerer tube.

Your dealer may be able to

change handlebar height

by moving height adjust-

ment spacers from below the

stem to above the stem, or

vice versa. Otherwise, you’ll have to get a stem of different

length or rise. Consult your dealer. Do not attempt to do

this yourself, as it requires special knowledge.

WARNING: On some bicycles, changing the stem

or stem height can affect the tension of the front brake

cable, locking the front brake or creating excess cable

slack which can make the front brake inoperable.

If the front brake pads move in toward the wheel rim

or out away from the wheel rim when the stem or

stem height is changed, the brakes must be correctly

adjusted before you ride the bicycle.

WARNING: Always tighten fasteners to the correct

torque. Bolts that are too tight can stretch and deform.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kona 2022 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info