Bedienungsanleitung Konica Minolta Bizhub C3350 (Seite 68 von 76) (Englisch)

717577

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

5-22 bizhub C3850FS/C3850/C3350

Registering a destination

5.6

[Fax]

[E-mail]

Settings Description

[No.] Destination registration number. The smallest available number that is not

used is automatically assigned.

[Name] Enter the destination name (using up to 72 characters).

[Favorites] Select this option to register a frequently used destination. The registered des-

tination is displayed in [Favorites], enabling you to easily specify a destination.

[Index] Select a corresponding character so that the destination can be index

searched by name.

[Fax number] Enter a destination fax number.

• When you use this machine in a PBX environment, tap [Outside] ([E] ap-

pears). A registered outside line number is automatically inserted.

• When you use this machine in a PBX environment, tap [Pause] following the

outside line number ([P] appears) to ensure dialing is successful.

• If you want to send out a push signal over the dial line, tap [Tone] ([T] ap-

pears).

• Enter [-] to separate a dial number. It does not affect the dialing of the num-

ber.

[Line Settings] If necessary, specify how to send a fax to a destination you want to register.

You may change the settings you made here before sending a fax.

• [ECM]: ECM is an error correction mode defined by ITU-T (International Tel-

ecommunication Union - Telecommunication Standardization Sector). Fax

machines equipped with the ECM feature communicate with each other,

confirming that the sent data is free of errors. This prevents image blurring

caused by telephone line noise.

If you send a fax using a telephone line in an environment containing static,

it may take a longer time to communicate. In this case, the communication

time can be reduced by setting ECM to OFF for transmission. However, im-

age or communication errors may occur depending on the specified com-

munication time value, so change the value to suit conditions.

• [V.34]: V34 is a communication mode used for super G3 fax communica-

tion. However, when the remote machine or this machine is connected to

a telephone line via PBX, you may not establish a communication in super

G3 mode depending on telephone line conditions. In this case, it is recom-

mended that you set the V34 mode to off to send data.

• [Check Dest. & Send]: Set this option to ON when the Check Dest. & Send

function is used. The fax number specified for fax is checked against the

destination fax number (CSI), and the fax is sent only when they match.

Settings Description

[No.] Destination registration number. The smallest available number that is not

used is automatically assigned.

[Name] Enter the destination name (using up to 72 characters).

[Favorites] Select this option to register a frequently used destination. The registered des-

tination is displayed in [Favorites], enabling you to easily specify a destination.

[Index] Select a corresponding character so that the destination can be index

searched by name.

[E-mail] Enter the E-mail address as a destination (using ASCII characters of up to 320

bytes).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Konica Minolta Bizhub C3350 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Konica Minolta Bizhub C3350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info