Bedienungsanleitung Konica Minolta Bizhub C3850FS (Seite 50 von 76) (Englisch)

717575

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

5-4 bizhub C3850FS/C3850/C3350

Using the print function (Windows environment)

5.1

5.1.2 Preparation for printing (network connection)

Checking a LAN cable for connection

Check that a LAN cable is connected to the LAN port of this machine.

For details on the cable connection port, refer to page 2-5.

Checking the network settings

Print out the Configuration Page, then check that an IP address is assigned to this machine.

To print out the Configuration Page, select [Utility] - [User Settings] - [Printer Settings] - [Print Reports] - [Con-

figuration Page].

dReference

If no IP address is displayed, you need to set up the network. For details, refer to page 4-3.

Installing the printer driver

Use the installer to install the printer driver on your computer.

0 Administrator privileges are required to perform this task.

0 Use the Driver & Utilities CD/DVD-ROM.

1 Insert the printer driver CD/DVD-ROM into the CD/DVD-ROM drive of the computer.

% Make sure that the installer starts, then proceed to Step 2.

% If the installer does not start, open the printer driver folder on the CD/DVD-ROM, double-click [Set-

up.exe], then go to Step 3.

% If the [User Account Control] window appears, click [Continue] or [Yes].

2 Click [Printer/FAX].

3 Read the license agreement, then click [AGREE].

4 Check the contents of the [Readme] window, then click [Next].

5 Select [Install printers/MFPs], then click [Next].

Connected printers are detected.

% For Windows Vista/7/8/8.1/Server 2008/Server 2008 R2/Server 2012/Server 2012 R2, you can se-

lect [Preference for IPv4] or [Preference for IPv6]. The address has the preference when detected in

both IPv4 and IPv6.

6 Select this machine, then click [Next].

% If this machine is not detected, restart it.

% You do not need to change the printing method from [Normal Printing] (Port 9100) unless otherwise

specified by the administrator. This guide describes how to configure the [Normal Printing] (Port

9100) setting.

% As the printing method, you can select [Normal Printing], [Internet Printing] (IPP), or [Secure Printing]

(IPPS). For details on the printing method, refer to [User's Guide: Print].

% Among the connected printers, only the target model is automatically detected and displayed. If

multiple target models are displayed, check the IP addresses.

% If the connection to this machine cannot be recognized, it is not displayed in the list. In such a case,

select [Specify the Printer/MFP Except for the Above. Select (IP Address, Host Name...)], then man-

ually specify the IP address and host name of this machine.

7 Select the check box of the printer driver you want to install, then click [Next].

% For features of each printer driver, refer to page 5-3.

8 Check the components to be installed, then click [Install].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Konica Minolta Bizhub C3850FS Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Konica Minolta Bizhub C3850FS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info