Bedienungsanleitung Konica Minolta Bizhub C3850FS (Seite 64 von 76) (Englisch)

717575

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

5-18 bizhub C3850FS/C3850/C3350

Using the copy function

5.4

5.4.2 Introduction of copy function

This section describes the convenient copy functions. For details on how to use each function, refer to [User's

Guide: Copy].

Function Overview

[Interrupt] If you urgently want to make a copy, even if the machine is printing an original,

you can interrupt the active job and make an intruder copy.

[Proof Copy] Before beginning actual copying, do a single test copy and check it is accept-

able.

When making a large number of copies, use the proof copy function to prevent

a large number of copy errors from occurring.

[ID Copy] When you want to copy cards, such as an insurance card, a driver license card

and a business card, you can arrange the front and back sides of the card on

a single page and copy the images on to the same side of one sheet. This can

reduce the number of sheets used.

[Color] Select a color for copying.

[Density] Adjust the density of a copy image.

[Original Type] Select the optimum settings for the original to copy it at the optimum image

quality level.

[Original Size] Select the size of the original to be scanned.

[Paper] Select the size and type of the paper for copying. You can also change the size

and type settings of the paper loaded in paper trays.

[Zoom] You can copy an original image enlarged or reduced by an arbitrary zoom ratio.

[Duplex/Combine] Copy an original onto both sides of paper. A multi-page original can be re-

duced and copied on the same side of a single sheet of paper.

[Finishing] • [Group/Sort]: You can select whether to sort the output sheets or group

them when printing multiple sets of copies.

• [Offset]: When multiple sets of copies are printed, the output position of

each set is staggered to enable easy separation. This function is only avail-

able when bizhub C3850FS is used.

• [Staple]: Feed out each set of copied sheets of paper after stapling them in

one corner. This function is only available when bizhub C3850FS is used.

[Separate Scan] If the number of original sheets is so large that they cannot be loaded into the

ADF at the same time, you can load them in several batches and handle them

as one job.

[Background Removal] You can adjust the background density of an original with the colored back-

ground such as newspaper or an original made with recycled paper.

[Glossy] Images are copied with a glossy finish.

[Image Adjust] You can adjust the color quality level of the original for copying.

[Page Margin] If you want to add a binding margin to bind copied sheets, you can adjust the

margin size.

[Frame Erase] Erases the four sides of the original to the same width. You can also specify

the width to be erased for each side.

[Date/Time] Add a date and time to make a copy.

[Page Number] Add page numbers to make a copy.

[Watermark] Add text such as "COPY" or "Confidential" in the center of each page in a tint

color to make a copy.

[Distribution Control

Number]

When printing multiple sets of copies, add copy numbers to make a copy.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Konica Minolta Bizhub C3850FS Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Konica Minolta Bizhub C3850FS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info