Bedienungsanleitung Konica Minolta Bizhub C650i (Seite 77 von 110) (Englisch)

717844

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

bizhub C650i/C550i/C450i 8-3

8.1 How to register a destination

8 Registering a destination

8.1 How to register a destination

Registering a fax address

Tap [Utility] - [Utility] - [Store Address] - [Address Book] - [New Registration].

In [Select Destination], select [Fax].

Enter destination information.

Tap [OK].

Setting Description

[No.] Destination registration number. Select [Use opening number] to automati-

cally assign the smallest available number. When you want to specify a num-

ber, select [Direct Input] and then enter a number.

[Name] Enter the destination name (using up to 24 characters).

[Index] Select an index to search for a destination using the registered name.

For a frequently used destination, select the [Main] check box. The destina-

tions are displayed on the destination selection screen, enabling the user to

easily select a destination.

[Destination] Enter the destination fax number (using up to 38 digits, including symbols #,

*, -, and characters T, P, and E).

• [T] or [*]: Enter the fax number when issuing a push signal in dial-up line

mode (while [Dialing Method] is set to [10pps] or [20pps]).

• [P]: Enter this when you want to insert a wait time between dials.

• [-]: Enter this to separate a dial number. It does not affect the dialing of

the number.

• [E-]: Enter the registered outside line number in PBX environment. Enter

this when [PBX Connection Setting] is set to ON.

[Confirm Fax Num-

ber]

Enter the fax number again.

This option is displayed when [Function ON/OFF Setting] - [Confirm Address

(Register)] is set to ON.

[Line Setting] If multiple lines are used, select the line used to send a fax.

In general use, use [Line 1]. If [Normal] is selected, either line, whichever is

not busy, is used for transmission.

[Communication

Setting]

If necessary, specify how to send a fax to a destination you want to register.

You may change the settings you made here before sending a fax.

• [V34 Off]: V.34 is a communication mode used for super G3 fax commu-

nication. When the remote machine or this machine is connected to a

telephone line via PBX, however, you may not establish a communica-

tion in the super G3 mode depending on telephone line conditions. In

this case, it is recommended that you turn the V.34 mode off to send da-

ta.

• [ECM Off]: ECM is an error correction mode defined by ITU-T (Interna-

tional Telecommunication Union - Telecommunication Standardization

Sector). Fax machines equipped with the ECM feature communicate

with each other, confirming that the sent data is free of errors. This pre-

vents image blurring caused by telephone line noise.

The communication time can be reduced by setting ECM to OFF for

transmission. However, an image error or communication error may oc-

cur depending on the specified communication time value, so change

the value to suit conditions.

• [International Communication]: Used to send a fax to areas where com-

munication conditions are poor. Faxes are sent at a lower speed.

• [Check Destination]: The fax number specified for fax is checked against

the destination fax number (CSI) and the fax is sent only when they

match.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Konica Minolta Bizhub C650i Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Konica Minolta Bizhub C650i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info