453477
146
Zoom out
Zoom in
Vorherige Seite
1/286
Nächste Seite
Scanning With the Machine134
Specifying the Destination Address (Scan to E-mail/FTP/
SMB)
Scan data can be sent via the network to a specified address (e-mail address,
FTP address or SMB address). The address can be typed in directly, or an
address registered on the machine can be selected.
" To send scan data via the network, settings for NETWORK SETTING
and
E-MAIL SETTING (when sending to an e-mail address) must
be specified.
" If the size of the scan data sent by e-mail exceeds the size specified
with
FILE SIZE, the data is automatically divided into multiple
e-mail messages. For details, refer to “SCAN SETTING Menu” on
page 63.
" To save scan data in a shared folder on a computer installed with
Windows or on the FTP server, the FTP address or SMB address
must be registered as a speed dial destination. These addresses can
be registered only from Local Setup Utility (LSU) or PageScope Web
Connection. For details, refer to the Reference Guide on the Docu-
mentation CD/DVD.
Directly Entering the E-mail Address
The destination address (e-mail address) where the scan data is to be sent
can be directly typed in.
" A maximum of 16 addresses (total of e-mail addresses from direct
input and an LDAP search) can be specified.
1 In the main screen (Scan mode), use the keypad to type in the destination
address.
" For details on entering/editing text, refer to “Entering Text” on page
265.
2 After the text is entered, press the Select key.
3 If an e-mail address was selected, press the + or , key to select FIN-
ISH, and then press the Select key.
" To add an additional e-mail address, select ADD in step 3, and
then specify the destination.
To edit the specified e-mail address, select
CHECK/EDIT in step
3, and then continue with step 2 of “Editing a Specified Destination
Address”. To delete an address, select
CHECK/EDIT in step 3,
and then continue with step 2 of “Deleting a Specified Destination
Address”.
146

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Konica Minolta Magicolor 4690MF wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Konica Minolta Magicolor 4690MF

Konica Minolta Magicolor 4690MF Bedienungsanleitung - Deutsch - 322 seiten

Konica Minolta Magicolor 4690MF Bedienungsanleitung - Holländisch - 300 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info