Bedienungsanleitung Konica revio kd 300 z (Seite 43 von 50) (Englisch)

288973

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

7776

LCD Monitor Operations

Slide the mode select lever to the

“

” or “ ” position.

Press the “

” button or wait three

seconds for the display to return to

its previous status.

Press the “@” or “#” button and

adjust the monitor brightness as

desired.

Press the “

” button.

¶ Monitor brightness cannot be adjusted

when the camera is connected to a

television monitor.

In the recording mode, the LCD

monitor can be turned ON/OFF by

pressing the “DISPLAY” button.

¶ To conserve power, it is recommended

that the monitor be turned off

whenever not being actually used.

This symbol indicates procedures which have a high likelihood of

resulting in death or serious personal injury if not followed properly.

DANGER

This symbol indicates handling procedures which may result in

death or personal injury if not followed properly.

WARNING

This symbol indicates procedures which may result in injury to the

user, or physical damage to the product if not followed properly.

CAUTION

Handling Precautions

¶ This camera is not designed to be waterproof, and cannot be used in the rain

or under water. If the camera should inadvertently be exposed to water, it

should be taken quickly to a Konica Service Center for inspection.

¶ Fingerprints or smudges on the camera’s lens or light sensors may adversely

affect the precision of the camera. If soiling occurs, use a piece of clean

chamois or commercially available lens tissue to gently wipe away the

smudge. Do not apply excessive pressure or touch the lens with any rough

material. An air blower or lens brush may be used to remove loose dust or dirt

from the lens.

¶ Clean the camera body by wiping with soft cloth. Never use benzene, thinner,

or other volatile solvents or cleansers, since such substances will damage the

body materials.

¶ Do not remove the SD memory card or Multi-Media Card (MMC) while the card

access LED is flashing.

¶ Interference may occur in recorded or played back images when the camera is

used in areas subject to strong electromagnetic interference (e.g., near a

television set or stereo speakers).

¶ Do not direct the camera lens directly toward the sun when shooting, since

the CCD element may be damaged.

¶ Dropping the camera may cause damage to internal parts even though the

camera may appear superficially undamaged. Always take the camera to a

Konica Service Center for inspection if it is dropped.

¶ Do not subject the LCD monitor to strong pressure or impact, nor press it with

a pointed object, since the glass screen and other parts may be damaged.

¶ Do not attempt to touch the insides of the memory card slot, since damage or

malfunction may result.

Caution and Warning Symbols

These Operating Instructions feature the following caution and warning symbols

to indicate items of special importance. Be sure to read the contents of these

warnings carefully, and use the features correctly.

名称未設定-1 2001.7.6, 7:03 PMPage 76-77 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Konica revio kd 300 z Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info