Bedienungsanleitung Konig Electronic GAMPS3-BLUETH1 (Seite 2 von 39) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

496721

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

Go to “Settings for audio device” in the settings menu:

1. Watch the indicator bar and speak into the headset, when you see movement in the bar the headset is installed

properly.

2. You can adjust the volume to your own desire.

NOTE: After pairing the PS3

and the headset once, you do not have to repeat it again when you want to use it the next

time.

Change to use the other ear:

You can wear the headset on the left or right ear. To change the headset to another ear:

1. Lift the top of the ear hook off the upper hinge pin.

2. Pull the hinge pin away and remove it from headset.

3. Change the direction.

4. Fix the ear hook on the headset again.

Hinge Pin

Pull Earhook Up

Call functions for cell phone use:

End a call Press the multifunctional button

Receive a call Press the multifunctional button

Reject a call Press and hold the multifunctional button for 2 seconds

Transfer a call from the phone to the headset Press and hold the Volume+ button

NOTE: The headset supports both hands free and headset proles. Accessing call functions depends upon which prole

your phone supports. See your phone’s user guide for more information. The indicator light provides information about

your headset status.

With the charger plugged in

Headset status Headset indicator

Red indicator on Charging in progress

Red indicator off Charging complete

With no charger plugged in

Headset status Headset indicator

Off Power off

On (blue & red Indicator ash in sequence) Paring mode

Blue & red indicator stop ashing Pairing successful

Blue indicator ashes (0.1sec on, 2.9sec off) Connected (on a call)

Blue indicator ashes (0.1sec on, 2 .9sec off) Standby (free)

Red indicator ashes Low battery

ENGLISH

Functions:

1. Earhook 5. Multifunctional button

2. Speaker 6. Charging socket

3. Volume up button 7. Indicator light

4. Volume down button 8. Microphone

Charging the headset:

1. Plug the USB charger into the socket on the side of the headset. The red indicator light turns on when the battery is

charging. It may take up to 1 minute before the light turns on. When the battery is fully charged, the red indicator will

turn off automatically.

2. Unplug the USB charger from the headset.

NOTE:

- You cannot use the headset while the battery is charging.

- Charge the battery for eight hours before you use the headset for the first time.

- Normal charging time is 2 hours.

Turning the headset on/off

• To turn the headset on, press and hold the multifunctional button until the indicator light flashes blue and red. Then,

release the button.

• To turn your headset off, press and hold the multifunctional button until the indicator light flashes rapidly. After you

release the button the headset will turn off.

NOTE: After 10 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.

Installation of the headset on a PS3

The PS3

Bluetooth

function is turned off by default. To use the headset on the PS3

follow the steps below:

1. Turn on your PS3

and go to the settings menu.

2. Select “Peripheral device settings” and go to “Register Bluetooth

device”.

3. Then select “Register headset” and let the PS3

search for devices.

4. Switch your headset to pairing mode by pressing the multifunctional button for 6 seconds. The blue/red indicator

flashes in sequence until the headset pairs with your PS3

5. Select the headset from the PS3

menu, enter the password: “0000” and confirm.

6. Then go to “Settings for audio device” in the settings menu.

7. Go to “Input device” and select the headset.

8. Go to “Output device” and select “Standard device”.

9. Select “Confirm” and the headset is ready for use.

NOTE: When the headset is successfully paired with your PS3

, the blue light indicator lights up steadily without the red

light indicator ashing.

Test and use the headset:

Your PS3

and headset are now paired and the headset is ready to use in on-line games. To conrm they are operating

properly:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Konig Electronic GAMPS3-BLUETH1 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info