Bedienungsanleitung Konig Electronic SAS-CAM11x0 (Seite 54 von 58) (Englisch)

731269

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

ENGLISH

7.4 Troubleshooting

1. Q: What can I do if the system does not detect the HDD?

A: Check if the power supply system is properly connected and data cord and power cables

are securely connected.

2. Q: We have changed the password but do not remember the new password, how can we

access the system?

A: If you forget system password, please consult with the service personnel.

3. Q: We are not getting any video signal on the DVR, what is wrong?

A: Check camera video cable and connections; or check monitor video cable and

connections; or conrm that the camera has the power and/or check camera lens setting.

4. Q: Why some channels display just a blank screen even if they receive video sources?

A: Check if the camera is connected to the system properly displays the image; check if the

camera is properly supplied with power.

5. Q: Can the DVR have problems if it gets too hot, how can I prevent this?

A: The DVR has a fan to help it dissipate heat while it is running. Please place the DVR in a

place where there is good air circulation and away from heat sources to increase stability

and life of the DVR.

6. Q: “Record” Can not work normally, how to deal with?

A: Check if the current screen is in Play mode, pressing [Stop] button to exit the Play mode

and then you can enter into the [Record] function.

7. Q: Why the Remote Controller can’t work normally?

A: Check if the battery is power o; or check if the Remote Controller is broken.

8. Q: Can we records whilst playing-back?

A: Yeah, you can do it. The system support you records whilst playing-back.

9. Q: Can we erase some recorded le from DVR.

A: Considering the safety factor, you can’t delete the recorded le directly from the device.

When you actually erase all the recorded les, please select HDD format function

10. Q: Why does the Buzzer keep sounding?

A: Please check if motion detection is on and the system has detected motion, make sure

the HDD is being detected and has sucient space available; check if video has lost etc.

11. Q: Why can’t stop [Stop] function?

A: Pressing [Stop] button only can stop manual record. If you want to stop Scheduled

record, please revise to [No Record] during this period.

7.5 Usage Maintenance

1. Please close the [OFF] button on the front panel rstly to avoid any data missing.

2. Please make sure DVR keep away from heating source.

3. Clean the internal dust regularly, keep DVR aeration well and be easy to heat dissipate.

4. Please not plug in RS-232 and RS-485 when power is on to avoid any damage to the port.

5. Please check the HDD cable and data cable to avoid the cable aging.

6. Please avoid other electronics device interfere video/audio signal of DVR a.s.a.p., or static

electricity and induced voltage damage to DVR.

7. Suggest user replace BNC cable regularly to keep signal input stable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Konig Electronic SAS-CAM11x0 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info