Bedienungsanleitung Konig Electronic SAS-IPCAM200 (Seite 5 von 40) (Alle Sprachen)

731262

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

English

Technical data

SAS-IPCAM200 SAS-IPCAM210 SAS-IPCAM220

Image sensor

1/4” 720p

progressive scan

CMOS

1/4” 720p

progressive scan

CMOS

1/4” 720p

progressive scan

CMOS

SNR ≥ 39 dB ≥ 41 dB ≥ 39 dB

Lens angle 3.6 mm, F1.4/56.14

3.6 mm,

F1.4/56.14

3.6 mm,

F1.4/56.14

IR LEDs 1 12 2 (array LEDs)

Frequency

(IR LED)

850 nm 850 nm 850 nm

Night vision 5 m 10 m 15 m

Resolution 720p / VGA / QVGA

720p / VGA /

QVGA

720p / VGA /

QVGA

Frame rate 30 fps / 24 fps 25 fps 25 fps

Memory card Maximum 128 GB Maximum 128 GB Maximum 128 GB

Power 5 V ± 0.3 V 5 V ± 0.3 V 12 V ± 0.3 V / 2 A

Consumption 3.2 W 3 W 3.5 W

Temperature -10 °C ~ 50 °C - 20 °C ~ 70 °C -20 °C ~ 70 °C

Humidity < 90% 90% 100%

Weight 135 g 625 g 340 g

Safety

• To reduce risk of electric shock, this product should only be

opened by an authorized technician when service is required.

• Disconnect the product from the mains and other equipment if

a problem should occur.

• Read the manual carefully before use. Keep the manual for

future reference.

• Only use the device for its intended purposes. Do not use the

device for other purposes than described in the manual.

• Do not use the device if any part is damaged or defective. If the

device is damaged or defective, replace the device immediately.

• The device is suitable for indoor use only. Do not use the device

outdoors.

• Do not expose the product to water or moisture.

Cleaning and maintenance

Warning!

• Do not use cleaning solvents or abrasives.

• Do not clean the inside of the device.

• Do not attempt to repair the device. If the device does not

operate correctly, replace it with a new device.

• Clean the outside of the device using a soft, damp cloth.

Warranty

Any changes and/or modications to the product will void the

warranty. We cannot accept any liability for damage caused by

incorrect use of the product.

Disposal

• The product is designated for separate collection at an

appropriate collection point. Do not dispose of the product with

household waste.

• For more information, contact the retailer or the local authority

responsible for waste management.

Documents

The product has been manufactured and supplied in compliance

with all relevant regulations and directives, valid for all member

states of the European Union. The product complies with all

applicable specications and regulations in the country of sales.

Formal documentation is available upon request. The formal

documentation includes, but is not limited to the Declaration of

Conformity, the Material Safety Data Sheet and the product test

report.

Disclaimer

Designs and specications are subject to change without notice. All

logos, brands and product names are trademarks or registered

trademarks of their respective holders and are hereby recognized as

such.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Konig Electronic SAS-IPCAM200 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info