Bedienungsanleitung Konig Electronic SEC-CA10 (Seite 3 von 63) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch, Finnisch)

508779

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

REMARKS:

WHEN HOUSEHOLD CLEANING SUPPLIES OR SIMILAR CONTAMINANTS ARE USED, THE

AREA MUST BE WELL VENTILATED.

THE FOLLOWING SUBSTANCES CAN AFFECT THE CO SENSOR AND MAY CAUSE FALSE

ALARMS AND DAMAGE TO THE SENSOR:

METHANE, PROPANE, ISO-BUTANE, ISO-PROPANOL, ETHYL ACETATE, HYDROGEN SULFIDE

DIOXIDES, AND ALCOHOL BASED PRODUCTS, PAINTS, THINNERS, SOLVENTS, ADHESIVES,

HAIR SPRAY, AFTER SHAVE, PERFUME AND OTHER CLEANING AGENTS.

USING THE DETECTOR

The unit will emit a “beep” sound and the red LED will flash once as a power up. The unit will start to

detect CO within 90 seconds of the batteries being installed.

Normal conditions: If there is no CO present, the green power LED will flash once every 30 seconds.

Alarm conditions: If the unit detects CO the alarm pattern will sound (3 short beeps) and the red LED

will flash for as long the CO remains at a dangerous level.

Silence function: If required, the audible alarm can be silenced by pressing the “Test” button. The

detector will re-activate after 30 seconds if CO remains present.

End of battery life: When the battery is run down, the unit will “beep” once every 30 seconds. The

green LED will continue to flash every 30 seconds.

Alarm memory feature: If you leave the property for a long period and in your absence the alarm has

activated, the unit will memorize the activation. On returning to the property press the “Test” button for

several seconds, the red LED will flash 3 times every 30 seconds if the alarm has activated in your

absence. The property should be immediately ventilated and the cause of the alarm investigated and

rectified. Pressing the “Test” button again will return the unit to normal operation.

End of sensor life: When the sensor comes to the end of its life, the yellow LED will flash

continuously and the alarm will sound.

WHAT TO DO IF THE ALARM SOUNDS

If the alarm sounds:

• Immediately open windows and doors to ventilate the property

• Call the Emergency Services

• If possible, turn off and stop using any fuelled appliances

• Evacuate the property

• Do not re-enter the property until the cause of CO has been detected and isolated, and the

detector has returned to normal operation

• Seek medical assistance for anyone suffering from, or suspected to be suffering from the effects of

carbon monoxide poisoning

• Do not use fuelled appliances until they have been assessed and cleared by a competent

professional

CO SAFETY TIPS

• Have any heating systems, vents, chimneys and flues inspected annually by a competent

professional

• Always install appliances according to the manufacturer’s instructions and adhere to local building

regulations

• Most appliances should be installed by a professional and inspected after installation. Regularly

examine vents, chimneys and flues for improper connections, rust/stains and cracks

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Konig Electronic SEC-CA10 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info