508723
11
Zoom out
Zoom in
Vorherige Seite
1/31
Nächste Seite
SPEED DOME CAMERA 

OPERATION INSTRUCTION
Speed dome can be driven through combination of hot keys on a keyboard controller. It can also be driven
through OSD menu. OSD menu can be activated by preset #95 call or double calling preset 1 (call twice within 5
seconds). Preset calling can be done through a keyboard controller or any other device (e.g. a computer ) that
can send proper command to the speed dome.
OSD menu operations are specified as follow:
PREHEATING SCREEN
When power on the dome and system temperature is
under -15C/5F
following screen shows up:
Outer Temp :-030C/-022F
System Temp: -020C/-004F
Fan Speed :6480rpm
System Under
-15C/5F
System Heating Up
Please Wait……
System heats up till the system temperature is above
-15C/5F. System starts to boot up after heating up
finishes.
< Outer Temp >
Environment temperature XXC/XXF C
Celsius
F
Fahrenheit
< System Tem >
System inner temperature
< Fan Speed >
The rotating speed of fan.
BOOT-UP SCREEN
When power on or restart the dome, the boot up
information will display on screen and then the dome
will conduct self-testing. “System booting up…” will
show on the screen until “boot-up success” shows up.
The whole boot up process lasts about 40 seconds.
This screen display disappears once the dome receives
any effective command.
Protocol : Ernitec
Baud Rate : 4800BPS
Camera ID : 001
Camera S/N : 8888888888
Model : -------------
Version : 1.20
Outer Temp :022C/071F
System Tem:027C/080F
Fan Speed :6480rpm
Booting Up…
Pt l
Dome control protocol.
<Baud Rate>
Dome control baud rate
<Camera ID>
The dome ID address set by dip-switch or
keyboard. (See APPENDX I)
<Camera S/N>
Camera serial number
<Model>
Speed dome model number.
<Version>
Hardware and software version
Protocol : Ernitec
Baud Rate : 4800BPS
Camera ID : 001
Camera S/N : 8888888888
Model : -------------
Version : 1.20
Outer Temp :022C/071F
System Tem:027C/080F
Fan Speed :6480rpm
Bootup Success
ACCESSING MAIN MENU
Display the dome’s main menu on your monitor
by calling preset 95 or calling preset 1 twice
within 5 seconds.
Note: For third party keyboard controller please
read manuals. As command to a preset may not
be the same among different manufacturers.
In case password protection is in effect, user
needs to input the correct 6-bit password to
enter the OSD menu. (Default password is
123456).
To enter password, move the joystick up or
down to select number (0-9), move the joystick
left or right to choose password digit. If the
input password is wrong, the password input
window will disa
pp
ear.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Konig Electronic SEC-CAM901 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info