Bedienungsanleitung Korg AX1000G (Seite 8 von 23) (Englisch)

488490

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

2. Playing the AX1000G

Example connections

The power must be off when you make connections.

Unintentional operation may damage your speaker

system, or cause malfunctions.

1. Connect your cables from the OUTPUT jacks of the

AX1000G to your guitar amp or mixer etc.

If you are using a mono connection, connect the L/

MONO jack. In order to take full advantage of the

AX1000G’s sound, we recommend that you use

stereo connections.

2. If you wish to use headphones, plug them into the

PHONES jack.

The output from the OUTPUT jacks will be turned off

when headphones are plugged in.

3. Connect your guitar to the INPUT jack.

4. If you wish to use the AUX IN jack, connect an

external audio device to it. Use the controls of the

connected device to adjust the volume.

5. Connect the included AC adapter to the DC 9V jack,

and plug the AC adapter into an AC outlet. When

you plug it in, the power will come on automati-

cally, and the name display will indicate the

program name.

Wrap the AC adapter cable around the cable hook. When

removing the cable from the hook, be careful not to pull

the cable with excessive force.

6. When you have finished making connections, turn

on the power of your guitar amp or mixer etc. Play

your guitar to produce sound, and check whether

connections have been made correctly. Adjust the

master level of the AX1000G and the gain or fader

controls of your guitar amp or mixer to set an

appropriate volume level.

DC9V

INPUT

PHONES

OUTPUT

AUX IN

Headphones

Audio device

Stereo-mini

Guitar

mono

Guitar amp etc.

Stereo-mini

Included AC adapter

Monaural phone plug

User

program

Preset

program

Play mode

When you turn on the power, the AX1000G will

always enter Play mode, and will be set to the

program and master level setting that were last

selected when the power was turned off.

Adjusting master level

The MASTER/VALUE display will show the master

level immediately after the power is turned on, a

program is selected, and after the EXIT switch is

pressed.

When the master level is shown, you can use the

MASTER/VALUE switches (▲, ▼) to adjust the master

level.

Adjusting input level

By holding down the EXIT switch and pressing the

MASTER/VALUE switches, you will be able to adjust

the input level so that it will match the output of the

connected instrument.

EXIT + ▲ “HI IN”:For high-output pickups such as

humbucking pickups

EXIT + ▼ “LO IN”: For low-output pickups such as

single coil pickups

Selecting a program

You can select from 40 preset programs

and 40 user programs.

User and preset programs are each

organized into ten banks, with four

programs in each bank. The currently

selected bank is shown by the bank

number display, and the program is

shown by the program LEDs. When a

user program is selected, the decimal point “.” located

at the lower right of the bank number display will

light.

To select a program in the same bank

Press a program switch 1—4 to select the desired

program. The program LED of the selected program

will light, and the name display will indicate the

program name.

To select a program from a different bank

Press the bank switch to select the desired bank. (The

bank number display will blink.) The banks will cycle

in the order of user banks 0, 1, 2, 3 ...9, preset banks 0,

1, 2, 3...9, user banks 0, 1, 2, 3...

• Each time you press the bank switch, the bank

number display will increase by one.

• Each time you simultaneously press the bank

switch and program switch 4, the bank number

display will decrease by one.

When the desired bank number appears, press a

program switch 1—4 to select the desired

program.(The bank number display will change from

blinking to lit.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg AX1000G Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info