Bedienungsanleitung Korg AX100G (Seite 15 von 18) (Englisch)

488491

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

4. Appendices

3. Advance the expression pedal all the way until the pedal in-

dicator blinks, to enter record-ready mode.

4. Begin playing a phrase. Recording will begin automatically

when you start playing your guitar, and the pedal indicator

will change from blinking to lit.

5. Recording will end when you record up to the maximum time,

or when you once again advance the pedal all the way. When

recording ends, the pedal indicator will go dark, and the re-

corded sound will be played back as a loop. If you wish to re-

do the recording, repeat from step "3. Advance the expression

pedal ..."

6. Operate the expression pedal.

AMB (Ambience effect)

Knob 1 Knob 2 Knob 3 Knob 4 Knob 5

TYPE TIME TONE FEEDBACK MIX

DELAY 10 [ms]...2 [SEC] 0...10.0 0...10.0 0...10.0

ROOM1 ———0...10.0

ROOM2 ———0...10.0

GARAGE1 ———0...10.0

GARAGE2 ———0...10.0

HALL ———0...10.0

ARENA ———0...10.0

These are reverberation-type effect models such as delay, reverb,

and echo. The following parameters are assigned to each knob.

Knob 1 TYPE Selects the effect type

Knob 2 TIME Adjusts the delay time

Knob 3 TONE Adjusts the tonal quality

Knob 4 FEEDBACK Adjusts the delay repeats

Knob 5 MIX Adjusts the mix amount

DELAY (Delay)

This adds spaciousness to the sound by using a stereo delay with

a time difference between left and right.

By pressing the TAP switch two times, you can set the TIME of

knob 2 to the corresponding tempo.

ROOM1 (Room 1)

Deep room type reverb

ROOM2 (Room 2)

Bright room type reverb

GARAGE1 (Garage 1)

Garage-type reverb1

GARAGE2 (Garage 2)

Garage-type reverb2

HALL (Hall)

Hall type reverb

ARENA (Arena)

Arena-type reverb

ROOM (Room Reverb)

This simulates the reverberation of a small room the size of a

studio. The pedal will control the reverb level.

GARAGE (Garage Reverb)

This simulates the reverberation of a mid-size room such as a

garage. The pedal will control the reverb level.

HALL (Hall Reverb)

This simulates the reverberation of a mid-size to large hall. The

pedal will control the reverb level.

Sample and play

The SAMPLE1 to LOOP2 effects allow you to record a phrase

up to 6 seconds, and then use the pedal to play it back.

The recorded phrase will be erased when you change the effect

type or program, when you use the Phrase Trainer, or when you

turn the power off.

The recorded phrase will be erased when you change the effect

type or program, when you use the Phrase Trainer, or when you

turn the power off.

SAMPLE1 (Sample1)

The recorded phrase will playback when you press the pedal.

SAMPLE2 (Sample2)

The recorded phrase will playback when you press the pedal,

and will playback in reverse when you return the pedal.

Procedure for Sample 1 and 2

1. Select SAMPLE 1 or SAMPLE 2 for the Pedal effect, or choose

a program that uses these effects.

2. Use value knob 3 to select the recording time (S is three sec-

onds of high-quality recording, L is six seconds of extended

recording).

3. Advance the expression pedal all the way until the pedal in-

dicator blinks, to enter record-ready mode.

4. Begin playing a phrase. Recording will begin automatically

when you start playing your guitar, and the pedal indicator

will change from blinking to lit.

5. Recording will end when the recording time has elapsed. It

is not possible to stop recording before this time. If you wish

to re-do the recording, repeat the procedure from "3. Advance

the expression pedal... ."

6. Operate the expression pedal.

LOOP1 (Loop1)

As soon as you record a phrase, it will be played back as a loop

(repeatedly). When you return the pedal (to minimum volume),

the phrase will return to the beginning. When you advance the

pedal, loop (repeated) playback will occur again. Use the pedal

to adjust the playback volume.

LOOP2 (Loop2)

The pedal will control the length of the loop. The loop will be-

come shorter as you return the pedal, and at the minimum length

the loop will not playback at all.

Procedure for Loop 1 and 2

1. Select LOOP 1 or LOOP 2 for the Pedal effect, or choose a

program that uses these effects.

2. Use value knob 3 to select the maximum recording time. (S

is 3 seconds of high quality, L is 6 seconds of extended re-

cording.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg AX100G Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info