Bedienungsanleitung Korg AX10G (Seite 7 von 40) (Deutsch, Englisch, Französisch)

488496

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

FUNCTION button

To edit one of the parameters printed on the front

panel in blue, hold down this button and operate the

corresponding knob or button. For example, you can

edit the speed of the modulation effect by holding

down this button and using the MODULATION

DEPTH buttons.

MASTER (CANCEL) buttons

These buttons adjust the overall volume of the

AX10G (MASTER).

When the AX10G is ready to write (store), pressing

either of these buttons will cancel the Write operation

(CANCEL).

WRITE button

Use this button to write (store) a program.

When you press this button, the AX10G will enter

“write-ready” mode; if you press this button again,

the program will be written (stored). (p.12)

PEDAL FX/BANK HOLD button

This button selects the effect that will be controlled

by the expression pedal (Pedal Effect).

Each time you press the button, the LED will change

color to indicate the pedal effect that will be con-

trolled.

ORG:WAH (orange): Pedal wah

RED:MOD (red):

The effect selected by MODULATION

GRN:AMB (green):

The effect selected by AMBIENCE

OFF:VOLUME (dark): Volume pedal

If something other than WAH is selected for the pre-

effect, you cannot use the PEDAL FX button to

select WAH.

By holding down the FUNCTION button and pressing

this button, you can select “bank hold” mode as the

way in which programs will be selected (BANK

HOLD). Refer to “Selecting programs: b” (p.9).

Expression pedal

You can use this expression pedal to control effects

or volume. By advancing the pedal all the way

forward you can switch the selected pedal effect on/

off.

PEDAL LED

This LED will light if the expression pedal is active.

ORIGINAL VALUE LED

This LED will light if the edited value is identical to

the saved (original) value.

Program select switches DOWN/BANK DOWN, UP/

BANK UP –BYPASS, TUNE–

Use these switches to select programs. You can

select programs in one of three ways. Refer to

“Selecting programs” (p.9).

If you press the UP and DOWN switches simulta-

neously, the effects will be bypassed and the tuner

will operate (BYPASS) (p.9).

Rear panel

INPUT L/H select switch

Set this switch according to the pickup output of your

guitar.

H: Suitable for a pickup with high output, such as a

humbucking pickup

L: Suitable for a pickup with low output, such as a

single coil pickup

INPUT jack

Connect your guitar to this jack. Use a 1/4" mono

plug. If the AX10G is running on batteries, the power

will come on when you plug into this jack.

If the AX10G is running on batteries, the power will

not come on if a 1/4" stereo plug is inserted.

OUTPUT jack

Connect this jack to your guitar amp, recorder, or

headphones.

AMP/LINE select switch

Set this to “AMP” if you are plugging into an amp, or

to “LINE” if you are plugging into a recorder or using

headphones.

DC9V

The separately sold AC adapter can be connected

here (p.8). When this is connected, the power will be

turned on automatically.

You must only use the specified AC adaptor (p.14).

Cable hook

If the separately sold AC adapter is used, connect the

cable of the AC adapter around this hook (p.8).

2425 20 21 22 23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg AX10G Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info