Bedienungsanleitung Korg ESX-1 (Seite 83 von 108) (Englisch)

500314

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

7. Global mode

In Global mode you can set parameters such as metronome

settings, overall tuning, memory protect, etc. To enter Global

mode, press the GLOBAL key. To exit Global mode, press

a different mode key.

If you turn off the power without writing the settings

you make in Global mode, your changes will be

discarded. If you want to keep the changes you

made, perform the Write operation (☞p.84 “Saving

your Global mode settings”).

Setting the metronome

These controls allow you to specify how the metronome will

operate. The metronome is convenient when you are using

realtime recording to create patterns.

The metronome will sound at quarter-note intervals. Except

for when you have selected the “On➝3/4” setting, the sound

of metronome is output from line out jacks L/R and from

the headphone jack, mixed with the sound of the ESX-1’s

playback and audio input.

1. Press the [

] key until the parameter display reads

“Metronom.”

2. Turn the dial to make the desired metronome set-

ting.

METRONOME ..... [Off, Rec0, Rec1, Rec2, On,

On➝3/4]

Off The metronome will not sound.

Rec0 The metronome will sound only during

recording (when REC and PLAY/CAN-

CEL keys are lit)

Rec1 When you start recording, there will be a

one-measure count before recording ac-

tually begins. The metronome will sound

only during recording.

Rec2 When you start recording, there will be a

two-measure count before recording ac-

tually begins. The metronome will sound

only during recording.

On The metronome will sound during play-

back or recording. There will be no count

before recording begins.

On➝3/4 During playback or recording, the met-

ronome will be output from individual

out jacks 3/4. (The metronome will not

be output from the line out L/R jacks or

the headphone jack.) There will be no

count before recording begins.

You cannot write the metronome setting. When the

power is turned on, it will always be “Off.”

Setting the input jack to mono/

stereo

AUDIO IN MODE ...................L/Mono, Stereo

This specifies whether the sound that is input to

the audio in jack will be monaural (left channel

only) or stereo. Select “L/Mono” if you are using a

monaural source such as a mic. Select “Stereo” if

you are using a stereo source such as a CD player.

1. Use the [

]/[ ] cursor keys to make the display

read “AudioIn.”

2. Turn the dial to select “L/Mono” or “Stereo.”

Even if Audio In Mode is set to stereo, sampling

will record the mixed sound of the left and right

input channels if the Sampling Mode (☞p.21 “Sam-

pling”) is monaural. If you set Audio In Mode to ste-

reo, use a stereo 1/4" phone plug to make connec-

tions.

Exchangeing the arpeggiator

functions

This setting switch the functions of the arpeggiator slider

and ribbon controller.

1. Use the [ ]/[ ] cursor keys to make the display

reads “ArpCntrl.”

2. Turn the dial to select “Normal” or “Revers”

ARP CONTROL....................... Normal, Revers

Normal Slider: Pitch control (keyboard parts)

Ribbon: Gate time (keyboard, audio in

parts) / Resolution (drum, slice, stretch

parts) + Note-on

Revers Slider: Gate time (keyboard, audio in

parts) / Resolution (drum, slice, stretch

parts)

Ribbon: Pitch control (keyboard parts) +

Note-on

Protecting the data in memory

This setting lets you protect the Pattern mode and Song mode

data.

Use the [ ]/[ ] cursor keys to select “Protect” in the pa-

rameter display. Turn the dial to select Off or On.

PROTECT........................................... Off, On

On The WRITE/RENAME key will be dis-

abled, and it will be impossible to rewrite

data or receive MIDI data dumps.

Off Edited data can be saved, and data

dumps can be received.

With the factory settings this is turned On.

The memory protect setting applies to Pattern mode, Part

Edit mode, Step Edit mode, and Song mode. However,

you can write your settings in Global mode regardless

of the memory protect setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg ESX-1 Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info