Bedienungsanleitung Korg ESX-1 (Seite 87 von 108) (Englisch)

500314

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

7. Global mode

Never turn off the power or remove the SmartMedia

while saving or formatting. Doing so may render

the SmartMedia unusable.

You cannot save data on SmartMedia that has little

remaining capacity.

Loading just a single sample

from SmartMedia

You can load individual samples from a file that was saved

by an ESX-1 or ES-1, as well as loading WAVE or AIFF files.

Loading a WAV or AIFF file

1. Insert the SmartMedia into the SmartMedia slot.

2. Press the GLOBAL key (the key will light).

3. Hold down the SHIFT key and press step key 16

(CARD). (Key 16 will blink.) The parameter dis-

play will show “CardMenu.”

4. Make sure that the value display shows “Load,”

and press key 16. The parameter display will show

“Load.”

5. The value display will show “All.” Turn the dial to

select the file format shown in the value display;

either “WAV” or “AIFF.” Then press key 16.

6. Select the sample that you want to load. The value

display will show “Load,” and the parameter dis-

play will show the “(sample name)” for samples that

match the file format you selected in step 6. Turn

the dial to select a sample. At this time you can press

the PLAY/PAUSE key to play the selected sample.

When you have selected a sample, press key 16.

7. Select the load-destination sample number. The pa-

rameter display will show “LoadTo,” and the value

display will show “(sample number in the ESX-1’s

internal memory).” (You can press the SHIFT key

to see the name of the sample.) Turn the dial to se-

lect the load-destination number. Already-used

sample numbers have an asterisk “*” at the right

of the sample number. Press key 16 to execute the

Load operation. During loading, the step keys show

the state of progress.

Loading from an ES (ESX-1 or ES-1) file

1. Insert the SmartMedia into the SmartMedia slot.

2. Press the GLOBAL key (the key will light).

3. Hold down the SHIFT key and press step key 16

(CARD). (Key 16 will blink.) The parameter dis-

play will show “CardMenu.”

4. Make sure that the value display shows “Load,”

and press key 16. The parameter display will show

“Load.”

5. The value display will show “All.” Turn the dial to

select “ESsmpl,” and press key 16.

6. Select the file from which you want to load. The

parameter display will show “LdFile,”and the pa-

rameter display will show the “(ESX-1 or ES-1 file

names)” existing on the SmartMedia. Turn the dial

to select a user file, and then press key 16.

7. Select the sample that you want to load. The value

display will show “Load,” and the parameter dis-

play will show the “(sample name)” for samples in-

side the user file you selected in step 6. Turn the

dial to select a sample. At this time you can press

the PLAY/PAUSE key to play the selected sample.

When you have selected a sample, press key 16.

8. Select the load-destination sample number. The pa-

rameter display will show “LoadTo,” and the value

display will show “(sample number in the ESX-1’s

internal memory).” Turn the dial to select the load-

destination number.

At this time, you can press the SHIFT key to switch

the display to the sample name.

Already-used sample numbers have an asterisk “*”

at the right of the sample number.

9. Press key 16 to execute the Load operation. During

loading, the step keys show the state of progress.

When loading is completed, you will return to Pat-

tern mode. (Key 16 will go dark, and the Pattern

mode key will light.) If you decide to cancel mid-

way through the procedure, use the mode keys to

switch to a mode other than Global mode (e.g.,

Pattern mode).

This operation will overwrite the internal memory;

use caution, and make sure that you are not over-

writing important data you want to keep

With the factory settings, memory protect is turned

on, so it will not be possible to load samples. Turn

memory protect off before you execute the Load

operation. (☞p.83 “Memory Protect”)

If the sample you are attempting to load exceeds

the remaining free space in memory, a message

of “MemFull” will appear, and you will be unable to

execute the Load operation. Delete unneeded

samples to increase the amount of free space, and

try the Load operation once again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg ESX-1 Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info