Bedienungsanleitung Korg i3 (Seite 19 von 36) (Englisch)

707347

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Changing the Style Settings

Performance Mode

Changing the Style Settings

You can freely change the settings of the styles you select. Feel

free to change the style settings to match your preferences.

The changes you have made will revert to their default

state once you turn off the power. To keep your settings intact,

save them in a set list (page 16).

Turning the accompaniment part

on/off and changing the volume and

sounds

The accompaniment parts included in a style can each be

turned on and off, and you can change their volume and

sounds.

Turning a part off (mute)

Hold down the EXIT (SHIFT) button and press the button

of the part you wish to turn off (the button will go dark).

To turn the part back on, hold down the EXIT (SHIFT) but-

ton once more and press the button of the part you wish to

turn on (mute cancel).

Adjusting the volume

Turn the dial while pressing the button corresponding to

the part for which you want to adjust the volume.

The volume of that part will appear on the display.

Tip:

You can also change the volume balance between the key-

board and accompaniment parts (page 20).

Changing sounds

Press the button for the part whose sound you want to

change (the button will blink).

The sound name for the part will appear on the display.

1 3

Use the dial or the +/– buttons to select a sound.

Press the EXIT (SHIFT) button to return to the sound set

select screen.

Selecting effects for the

accompaniment parts

The accompaniment parts can use two effects (effect 3/4) at

the same time. These effects are preset in each style.

You can change the effect types and how they will be applied

to match your tastes.

Changing the effect type

This shows how you can change the effect types that are set

for effects 3 and 4.

Press the EFFECT button.

Press the CATEGORY u button to recall the setting

screen for effect 3 or 4.

Select the effect type using the dial or the +/– buttons.

Selecting “Default” will set the effect that is preset for that

style by default.

Press the EXIT (SHIFT) button to return to the sound set

or sound select screen.

Note:

Effect 1 and 2 are effects used only for the keyboard

parts. Changing the settings will not change the accompani-

ment part effects.

Tip:

See the “Voice Name List” (PDF) for a list of effect types.

Changing how the effects are applied

This changes how effects 3 and 4 are applied (speciﬁcally, their

send levels). This setting can be conﬁgured for each of the

accompaniment parts (bass, drums, percussion and other parts

1–5).

Note:

Depending on the type of effect, the change in sound

may not be too noticeable.

Press the EFFECT button.

Press the CATEGORY u button to recall the setting

screen for effect 3 or 4.

Turn the dial to change how the effect is applied, while

holding down the button of the accompaniment part you

want to set.

Press the EXIT (SHIFT) button to return to the sound set

or sound select screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg i3 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg i3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info