Bedienungsanleitung Korg Kronos (Seite 10 von 305) (Englisch)

707341

Zoom out

Zoom in

Vorherige Seite

1/305

Nächste Seite

Introduction to KRONOS

If you switch to one of the other Control Assign modes, and

then go back to TIMBRE/TRACK, it will automatically

return to the previously selected group (1-8 or 9-16).

AUDIO

AUDIO lets you use the control surface to adjust the

volume, play/mute status, solo, pan, and send levels of the

analog, S/P DIF, and USB audio inputs. In Sequencer mode,

you can also choose to control audio tracks 1–8 (HDR 1-8)

or 9–16 (HDR 9-16).

As with TIMBRE/TRACK, if you switch to one of the

other Control Assign modes, and then go back to AUDIO, it

will automatically return to the previously selected group

(Inputs, HDR 1-8 or HDR 9-16).

EXT

EXT (External) lets you use the control surface to transmit

MIDI messages to external MIDI devices.

RT KNOBS/KARMA

RT KNOBS/KARMA lets you modulate sounds and effects

with the knobs, and control KARMA with the sliders and

switches.

TONE ADJ/EQ

TONE ADJ (Tone Adjust) gives you hands-on access to

sound editing, using the sliders, knobs, and switches. In

Combi and Sequence modes, it also lets you edit Programs

within the context of the Combi or Song, without making

any changes to the original Program data.

EQ is available only in Set Lists. This is a nine-band graphic

EQ applied to the sound after TFX2, which tailors the sound

from the main stereo outputs (including the analog L/R

outputs, S/P DIF, and USB).

You can use this EQ to compensate for the acoustic

environment of a specific club or other performance venue.

The sliders are mapped to the nine bands of the EQ, for

quick and intuitive adjustments.

More information on the Control Surface

For more information on how the Control Surface works in

the different modes, see:

• Program mode: “0–9: Control Surface” on page 26 of the

Parameter Guide

• Combi mode: “0–9: Control Surface” on page 443 of the

Parameter Guide

• Sequence mode: “0–9: Control Surface” on page 548 of

the Parameter Guide

MIXER KNOBS button

This applies only when CONTROL ASSIGN is set to

TIMBRE/TRACK or AUDIO. It toggles the knobs

between controlling the pan of all channels or controlling the

pan, EQ, and sends of the currently selected channel.

RESET CONTROLS button

This feature lets you reset the Vector Joystick to the center

position, or reset any of the Control Surface sliders, knobs,

or switches to their saved value.

To reset a single control, hold down RESET CONTROLS

and then move a Control Surface slider or knob, press one of

the control surface buttons, or move the Vector Joystick.

To reset all of the sliders, knobs, and switches of the current

CONTROL ASSIGN mode at once, hold down RESET

CONTROLS and then press the currently-lit CONTROL

ASSIGN button again.

You can also reset all of the sliders and switches in the

KARMA Module by holding RESET CONTROLS and then

pressing the KARMA MODULE CONTROL button.

Similarly, to reset a single KARMA Scene, hold RESET

CONTROLS and press any of the SCENE buttons.

Finally, you can also use this to clear all solos, by holding

RESET CONTROLS and then pressing the SOLO button.

For more information, see “RESET CONTROLS” on

page 27 of the Parameter Guide.

SOLO button

This applies only when CONTROL ASSIGN is set to

TIMBRE/TRACK or AUDIO. It toggles the SELECT

buttons between selecting the current Oscillator, Timbre,

Track, or Audio Input (when SOLO is off) or soloing the

channel (when SOLO is on).

For more information on SOLO in the various modes, see:

Programs: “SOLO switch and SELECT switches 1–3” on

page 28 of the Parameter Guide

Combinations: “Solo switch and Select switches 1–8” on

page 445 of the Parameter Guide

Sequencer: “Solo switch and Select switches 1/9–8/16” on

page 550 of the Parameter Guide

3. Data entry

When you’ve selected a parameter on the TouchView

display, you can edit it using any of the four front-panel data

entry controls:

• The VALUE slider

• The Inc and Dec buttons

• The VALUE dial

• The numeric keypad

VALUE slider

Use this to edit the selected parameter’s value.

This control is convenient for making large

changes to the value, such as moving quickly to

the minimum or maximum setting.

You can also use the VALUE slider as a

modulation source, but only when the following

are true:

• You’re on the Program mode P0-Main page,

and the big Program name is selected, or

• You’re on the Combination mode P0– Prog

Select/Mixer page, and the big Combination

name is selected.

• You’re on the Set List P0-Play page.

In these cases only, the VALUE slider sends

MIDI CC#18, and can be used as a modulation

source.

Inc and Dec buttons

These are used to increase or decrease the parameter value

by individual steps. They’re convenient for making fine

parameter adjustments.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kronos Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kronos

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info