Bedienungsanleitung Korg Kross 2 (Seite 19 von 152) (Englisch)

707348

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Basic Information Basic operations

ENTER button and

▲▼

cursor buttons

When you select a parameter and press the ENTER button, a

▲▼ symbol will appear beside the value ( → ), and

you can use the ▲▼ cursor buttons to increment or decrement

the value in steps of one. When you’ve specified the value, press

the ENTER button once again to confirm it. This method is

convenient when you want to make small changes.

Note:

If you decide not to change the value, press the EXIT button.

Using the keyboard to enter a note number or velocity

value

For parameters that specify a note number (such as G4 or C#2) or

a velocity value, pressing the ENTER button will cause a ▲▼

symbol to appear beside the value (see above). You can play a

key to directly enter a note number or velocity value. When

you’ve specified the value, press the ENTER button once again to

confirm it.

ENTER button

If the parameter item is a toggle, radio button, or check box, press

the ENTER button to switch the setting.

Other

CATEGORY dial, VALUE dial

Parameters indicated by (category select icon) can be edited

using the CATEGORY dial and VALUE dial to change the

category and program/combination number. The dial’s LED will

light to indicate the current category.

In Program mode you can select the program category and

number.

In Combination mode these dials have the following two

functions.

• Select the combination category and number.

• When the edit cell is a timbre program (highlighted), the

dials select the program category and number.

In Sequencer mode when the edit cell is a track program

(highlighted), the dials select the program category and number.

Compare/Undo function

Program, Combination mode

Use this when you wish to compare the edits you have made to a

program or combination’s sound with the un-edited original (i.e.,

the sound that is written into memory).

While editing a program or combination, you can turn on the

Compare function (select the check mark) to recall the settings

that were last written to that program number or combination

number. When you turn off the Compare function (remove the

check mark), you will return to the settings that you had

previously been editing.

1. While editing, turn the Compare function on (select

the check mark).

To turn this on, press the FUNCTION button to access

the function list, use the PAGE+ (▼) or PAGE– (▲)

button to select Compare, and press the MENU (OK)

button.

The sound that had been saved before you began editing

will be recalled.

2. When you turn off the Compare function (remove the

check mark), you will return to the sound that you

had previously been editing.

To turn it off, select the Compare function once again and

press the MENU (OK) button.

Note:

If you edit the settings that were recalled by turning

Compare on (i.e., the saved settings), the check mark will be

cleared, and your previously edited settings will be lost. Even if

you turn Compare on again (select the check mark), the previous

settings will not return.

Sequencer mode

In Sequencer mode, you can use the Undo function to make

“before and after” comparisons immediately after using realtime

recording or step recording to record a song, or after performing

an edit on a track.

For example, this can be used effectively when realtime-

recording a MIDI track for a song.

1. Realtime-record a MIDI track. (Take 1)

2. Once again, realtime-record on the same track.

(Take 2)

3. If you turn on the Undo function (select the check

mark), take 1 will be recalled.

4. If you turn off the Undo function (clear the check

mark), take 2 will be recalled.

5. If at step 3 you once again realtime-record on the

same track (take 3), the Compare function will now be

referencing take 1.

6. If at step 4 you once again realtime-record on the

same track (take 3), the Compare function will be

referencing take 2.

In this way, the Undo function lets you recall the previous

recording or the previous state of event editing.

Note:

If you edit while Undo is on (the check mark selected), the

check mark will be cleared. That musical data now becomes the

musical data that will be selected when Undo is off.

Global/Media mode

The Compare function is not available in Global/Media mode.

Audio recorder

When using the audio recorder, you can use Undo to return to a

previously recorded state. You can step back through multiple

takes. You can also redo. In the AUDIO RECORDER SETUP

dialog box, press the PAGE– (UNDO) button.

Pad Audio Play

As with the audio recorder, the pad audio play function also lets

you return to the previously recorded state. In the AUDIO SONG

SETUP dialog box, press the PAGE- (UNDO) button.

Pad Sampler

The compare function cannot be used with pad sampler

recording, nor when editing in the EDIT SAMPLE window.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info