Bedienungsanleitung Korg Kross 2 (Seite 36 von 152) (Englisch)

707348

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Playing and editing Programs

Quick Split

A typical example of a split is when you play a piano or

electric piano with your right hand (in the upper region) and

a bass sound with your left hand (in the lower region). As an

example, here’s how to create this sound.

1. In Program mode, select a piano program.

Please see steps 1–2 of the “Quick Layer” section on

page 29.

Note: The procedure will be smoother if you first select

the sound that you want to play in the upper region of the

keyboard.

2. Press the LAYER/SPLIT button. (The button blinks.)

3. The QUICK LAYER dialog box or QUICK SPLIT

dialog box appear. If the QUICK LAYER dialog box

appears, press the PAGE+(►SPLIT ) button to switch

to the QUICK SPLIT dialog box.

4. Select the other program (bass) that will be split with

the program you selected in step 1; then specify its

volume and pitch.

• Program:

Select the other program. If you used the CATEGORY

dial and the VALUE dial, press the MENU button to

close the list.

(Default setting: category BASS, index number 000)

• Split Point:

Specify the point at which the two programs will be

divided. When you play the keyboard, you’ll hear the

bass in the lower region and the piano in the upper region

(including C4). (Default setting C4)

Note: You can use the keyboard to specify the split point.

Select this parameter, and press the ENTER button so that

the ▲▼ symbols are shown beside the value. Press a key

on the keyboard to enter the note number. Press the

ENTER button once again to confirm the setting.

• Lower/Upper:

If you select this parameter and press the ENTER button,

the two sounds will be exchanged. (Default setting:

Lower)

• Volume:

• Octave:

•Use ARP:

Please see step 4 of the “Quick Layer” section on

page 29.

Note: You can’t change the settings of the first program.

Note: The next time you open this dialog box, the last-

specified settings will be selected as the default.

5. When you’ve finished adjusting settings, press the

MENU (WRITE) button to open the dialog box,

adjust the appropriate settings, and save them.

Please see steps 6 and 7 of “Quick Layer” on page 29.

Combination settings made by Quick

Layer/Split

When you use the Quick Layer or Quick Split function, the

effects, Drum Track, and step sequencer will be assigned to

the combination as follows.

The program that had been selected prior to pressing

the LAYER/SPLIT button

Program: copied to T01

Drum Track: copied to T10

Step sequencer: copied to T16

Arpeggiator: copied to Arp A

IFX1, IFX2, IFX5: copied to IFX1, IFX2, and IFX5

However, depending on the effect types and routing settings,

some effects will not be copied.

MFX1, MFX2: copied to MFX1 and MFX2

The program that was subsequently selected for

layer/split

Program: copied to T02

Drum Track: not copied

Step sequencer: not copied

Arpeggiator: if Use ARP is selected, copied to Arp B

IFX1, IFX2: copied to IFX3 and IFX4

However, depending on the effect types and routing settings,

some effects will not be copied.

MFX1, MFX2: not copied

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info