Bedienungsanleitung Korg Kross 2 (Seite 54 von 152) (Englisch)

707348

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Playing and editing Combinations

A suggested approach for editing

First select the program that each timbre will use, and set

each timbre’s MIDI channel to Gch (global MIDI channel)

and its Status to INT so that it can be played from the

keyboard.

Next, create any desired keyboard or velocity switch, layers,

or crossfades between the different Timbres.

After this, adjust the volumes of the Timbres, and set up any

other Timbre parameters as desired.

To add finishing touches to the sound, set up the Insert, and

Master Effect as desired. These effects can be different from

those associated with the individual Programs in Program

mode, if desired.

In addition, you can make arpeggiator and drum track

settings and controller settings to create the finished

Combination.

Note: You can use a function to copy effect and arpeggiator

settings from a program. (see page 96 of the Parameter

Guide)

Soloing a timbre

You can use the COMBI> PROG page Solo Setting function

to hear the sound of an individual timbre. (see page 32)

Comparing with the sound before

you started editing

Using COMPARE

When you’re in the process of editing a sound, pressing the

COMPARE button will recall the saved version of the sound,

as it was before you started editing.

For details, please see “Compare/Undo function” on

page 13.

Changing the program of each

timbre

Changing the Programs that are assigned to timbres (1–16) is

a quick way to dramatically alter the sound of the

Combination.

1. Access the COMBI> PROG page.

Press the PAGE+ or PAGE- button to select the page.

2. Press the cursor button ▼ to choose category/timbre

program select (it will be highlighted).

3. Use the cursor buttons ◄► to select the timbre whose

program you want to switch.

4. Turn the CATEGORY dial to select a category.

5. Turn the VALUE dial.

6. Press the MENU (OK) button or the ENTER button

to confirm your choice.

You can also switch programs by receiving MIDI

program changes from a connected external MIDI

device. (see page 316 of the Parameter Guide)

To select the timbre program via MIDI program change

the timbre’s status must be set to “INT.”

Adjusting the mix

Adjusting the volume of each timbre

1. Access the COMBI> MIXER page.

Press the PAGE+ or PAGE– button to select the page.

In this page you can view and edit the pan and volume of

timbres 1–16.

2. Press the cursor button ▼ to choose Volume (it will be

highlighted).

3. Use the cursor buttons ◄► to select the timbre whose

volume you want to adjust

4. Use the VALUE dial etc. to adjust the setting.

Note: If you check Hold Balance function, moving any one

of the volume sliders (volume values) will cause the volume

of the other timbres to change as well, maintaining the

relative volume balance between timbres 1–16. This is a

convenient way to adjust the overall volume.

Adjusting the panning of each timbre

1. Access the COMBI> MIXER page.

2. Use the cursor buttons ▲▼ to choose Pan (it will be

highlighted).

3. Use the cursor buttons ◄► to select the timbre whose

pan you want to adjust

4. Use the VALUE dial etc. to adjust the setting.

Note: Timbre pan interacts with the pan stored in the

Program. A setting of C064 reproduces the Program’s

oscillator pan settings. Adjusting the Timbre Pan will move

the sound to left or right while preserving the pan

relationship between the oscillators. A setting of L001 is far

left, and R127 is far right.

Timbre number

Category/combination select

Category/timbre program select

Active timbre

STEP(Step sequencer on/o)

SMP(Pad sampler on/o)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info