Bedienungsanleitung Korg Kross 2 (Seite 70 von 152) (Englisch)

707348

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Sequencer

Song editing

You can apply a variety of editing procedures to a song. The

available types of editing procedures are listed below.

Song

Load (Save) Template Song: Loads a song template into

the song (or saves a song as a template). (see page 59)

Copy From Combination/Copy From Program:

Copies

the settings of the specified combination/program to the

settings of the song that’s currently selected.

Copy From Song: This command copies all of the settings

and musical data from the specified song to the song that’s

currently selected.

Rename song: Renames the selected song. You can enter up

to 24 characters.

Delete Song: This command deletes the currently selected

song.

FF/REW Speed: This allows you to set the speed at which

fast-forward or rewind will occur.

GM Initialize: This command transmits a GM System On

message to the Sequencer mode, resetting all MIDI tracks to

the GM settings.

Set Song Length: This command changes the length of the

specified song.

Tracks

Event Edit: Here you can edit individual events of MIDI

data.

Erase Track: This command erases the data from the

specified track.

Copy/Bounce Track: The Copy Track command copies

musical data from the copy source track to the specified

track. The Bounce Track command combines the musical

data of the bounce source and bounce destination tracks, and

places the combined data in the bounce destination. All

musical data in the bounce source will be erased.

Erase Measure: This command erases the specified type(s)

of musical data from the specified range of measures. The

Erase Measure command can also be used to remove only a

specific type of data. Unlike the Delete Measure command,

executing the Erase Measure command does not cause the

subsequent measures of musical data to be moved forward.

Delete Measure: This command deletes the specified

measures. When the Delete Measure command is executed,

the musical data following the deleted measures will be

moved towards the beginning of the sequence.

Insert Measure: This command inserts the specified

number of measures into the specified track. When you

execute the Insert Measure command, the musical data

following the insert location will be moved backward.

Repeat Measure: This command repeatedly inserts the

specified measures for the specified number of times. When

you execute the Repeat Measure command, the measures

will be inserted following the measure specified by To End

of Measure, and musical data following the inserted data

will be moved backward.

Copy Measure: This command copies the measures of

musical data specified as the “From” source to the beginning

of the measure specified as the “To” location. When you

execute the Copy Measure command, the existing track data

at the copy destination will be rewritten.

Move Measure: This command moves the specified

measures of performance data to another measure.

Create/Erase Control: The Create Control command

creates control change, aftertouch, pitch bend, or tempo data

in the specified region of a MIDI track or the tempo track.

The Erase Control command erases data such as control

changes, aftertouch, pitch bend, or tempo in the specified

range.

Quantize: This command corrects the timing of MIDI data

of the type you specify (note data, control change,

aftertouch, pitch bend, program change, etc.) in the

track.You can also adjust for swing.

Shift/Erase Note: This command shifts (moves) or erases

the specified note numbers in a specified MIDI track and

range of measures.

Modify Velocity: This command modifies the velocity

values of notes in the specified area so that they will change

over time according to a selected curve.

Rename Track: This command renames the selected track.

You can enter up to 24 characters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info