Bedienungsanleitung Korg Kross 2 (Seite 100 von 152) (Englisch)

707348

100

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Pad Sampler

5. Move the cursor to Auto Rec Start:, and use the

ENTER key or the VALUE dial to select the auto

trigger method.

Off: Press the MENU (Rec Control) button to start

sampling.

Note-On: Sampling will start when you play the

keyboard.

SEQ START: Sampling will start when you press the

SEQUENCER (start/stop) button.

Input Low: Sampling will start when the audio input

level exceeds approximately –18 dB.

Input High: Sampling will start when the audio input

level exceeds approximately –6 dB.

6. Press the MENU (Rec Control) button to enter

sample-standby.

7. Sample the sound of your performance. Sampling

starts according to the method you specified Auto Rec

Start.

8. When you press the PAGE+ (Stop) button, sampling

stops. Sampling automatically stops if the maximum

recordable time elapses.

Note: During sampling, you can use the AUDIO REC

(play/pause) button to play back an audio song, or

play back samples of other pads to sample them. (You

can't play back an audio song from a pad.)

9. When you stop sampling, the EDIT SAMPLE window

appears. In the EDIT SAMPLE window, You can

specify the playback region and playback method of

the sample. ( “Editing a sample” on page 95)

10.When you press the pad that you recorded, the sample

plays back. (“Playing samples” on page 96)

Sampling the sound from external audio

input

If you want to sample an external audio input, proceed

through step 3 of “Sampling the sound of the KROSS” on

page 93 and then press the PAGE- (A-IN) button to access

the AUDIO IN-QUICK SETTING dialog box and change

audio input settings. (→ p.22)

When you finish making settings, press the MENU (DONE)

button to return to the SAMPLE RECORDING window.

Importing from a WAVE file

WAVE files saved on an SD card can be imported as samples

and played from the pad sampler.

The following file formats can be imported.

• File format: WAVE format uncompressed linear PCM

• Sampling bit depth: 16-bit

• Sampling frequency: 44.1 kHz or 48 kHz, stereo files

Note: The first 8 characters of the file name are shown.

1. Using your computer, copy the WAVE file that you

want to import into the KORG/KROSS2/DATA folder

of an SD card that was formatted by the KROSS.

2. Insert the SD card, and in the SAMPLER SETUP

window, select the import-destination pad.

3. Press the FUNCTION (FUNC) button to access the

function list; then select Import WAV, and press the

ENTER button to access the dialog box.(Please see

“Import WAV” on page 206 of the Parameter Guide)

4. In the file list, select the WAVE file that you want to

import.

5. Verify the import-destination pad number, and press

the MENU (OK) button to execute the import.

Note: Up to the first 14 seconds of the WAVE file can be

imported. Using your computer beforehand, make sure

that the audio you wish to import is within this limit.

Note: Importing might take a certain amount of time.

Note: From the SAMPLE RECORDING screen as well,

you can use the FUNCTION (FUNC) button to select

Import WAV and execute the procedure in the same way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info