Bedienungsanleitung Korg Kross 2 (Seite 147 von 152) (Englisch)

707348

147

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Messages Error and confirmation messages

141

was still underway after you wrote a program or other data

into internal memory.

• The KROSS will automatically initialize itself in order to

repair the internal memory. This message will appear at

this time; press MENU(OK) button to close the dialog

box. In some cases, the preload bank data may be

temporarily initialized. As necessary, use the Global/

Media mode Load Preload/Demo Data command to load

the preload data into internal memory, or if you have

your own backup PCG, load it using Media mode.

There is no readable data

Meaning: Either the file size is 0 or the file does not contain

data that can be accessed by the load or open procedure.

Alternatively, the data is damaged etc., and cannot be loaded

or accessed.

The SD card is busy. Please stop the audio recorder and try

again.

Meaning: The audio recorder is accessing the SD card.

• If the audio recorder is operating, stop the audio

recorder.

The SD card is busy. Please wait until the current

operation is complete.

Meaning:The SD card's “Automatic loading at start-up”

function or some other function is accessing the SD card or

the internal memory.

• If the SD card access indicator is blinking, wait until it

stops blinking.

The song exists, and will be initialized

Meaning: When executing the Sequencer mode Create New

Song function, you attempted to create a new song for a song

number that already exists. If you execute, the song will be

initialized, and a new song will be created and overwritten

onto it.

• If you don’t want to initialize the currently-existing song,

specify a new song number.

The system has been idle for more than **** and will shut

down in:

You can change the Auto Power-Off setting on the

following page: GLOBAL - PREF 1

Meaning: If there has been no operation for the specified

length of time of time, the Auto Power Off function will

display a message informing you that the power will turn off

soon. The power will turn off when the countdown time

indication reaches zero.

• If you want to continue using the KROSS, press a key or

switch. Auto Power Off will be reset, and the same

message will appear when the specified length of time

has once again elapsed without any operation.

• If you want to disable this function or change the time

setting, go to the GLOBAL> PREF 1 page and set the

Auto Power-Off parameter. Use the Write Global Setting

function to save the setting.

This title is already loaded

• You attempted to load a EX-PCM option title that had

already been loaded.

Unable to save file.

Meaning: In Media mode when you save a file, the path

length including the name of the selected directory exceeded

76 characters.

You can’t undo last operation. Are you sure?

Meaning: Once you enter event editing (even if you leave

event editing without actually editing an event), it will no

longer be possible to execute Compare to listen to the

previous edit. If you wish to enter event editing, press the

MENU (OK) button. To cancel, press the FUNCTION

(CANCEL) button.

You can’t undo this operation. Are you sure?

Meaning: When you exit recording or event editing in

Sequencer mode, the memory area for Undo (Compare

function) is not allocated. If you wish to keep the data that

was just recorded or edited, press the MENU (OK) button. If

you wish to return to the previous data (i.e., to delete the data

that was just recorded or edited), press the FUNCTION

(CANCEL) button.

Meaning: When editing in Sequencer mode, memory area

for Undo (Compare function) cannot be allocated. If you

wish to execute the edit, press the MENU (OK) button (It

will not be possible to undo your edit). If you decide not to

execute the edit, press the FUNCTION (CANCEL) button.

• In order to allocate memory area for Undo (Compare

function), delete unneeded data such as songs, or tracks.

We recommend that you data to media before you

execute the edit procedure.

You can use “Quick Setting” with [EXIT]+[ENTER]

Meaning: In the Audio In page of Program, Combination, or

Sequencer modes, this is shown at the bottom of the screen

when the G-SET check box On setting is selected. At this

time, the Audio In settings use the settings of the Global/

Media mode G-INPUT/CTRL>AUDIO IN page. To apply

these settings easily, hold down the EXIT button and press

the ENTER button to open the Audio In - Quick Setting

dialog box for G-SET.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 147

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info