Bedienungsanleitung Korg R3 (Seite 29 von 94) (Englisch)

668721

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

Knob [1]

Mode [Single, Layer, Split, Multi]

This parameter determines how many tim-

bres a program will use, and how those

timbres will be allocated. This parameter

cannot be selected for a vocoder program.

Single: Only one timbre will be used

(☞Figure 1-1).

Layer: Two timbres will be used. When you

play the keyboard, both timbres will sound

simultaneously.

You can edit each timbre indi-

vidually

(☞Figure 1-2)

Split: Split: Two timbres will be used. You

can specify a range of notes for each tim-

bre, and play each timbre from a different

area of the keyboard. Each timbre can be

edited separately (☞Figure 1-3).

Multi: Multi: Two timbres will be used.

This mode is mainly used when playing

the R3 from an external MIDI device. Each

timbre can be edited separately.

Timbre

Parameters

Knob [2]

SplitKey (Split Key) [C-1…G9]

This parameter is available only when the

“Mode” parameter is set to Split. Timbre 1

will play the notes that are below the speci-

fied note number, and timbre 2 will play

the notes that are above it.

T2MIDIch (Timbre 2 MIDI channel)

[Global, 01…16]

When the “Mode” is set to either Layer or

Multi, this parameter can be used to set the

MIDI channel for timbre 2.

If you choose the Global, the MIDI chan-

nel of timbre 2 will match the global MIDI

channel.

Timbre1 will always be set to the Glo-

bal MIDI channel. You can specify the

timbre1 MIDI channel by setting the

42. MIDI page parameter “MIDI Ch.”

Knob [3]

Assign [Mono1, Mono2, Poly]

This parameter specifies how notes will be

articulated from the keyboard (or MIDI

source).

Mono1: The timbre will play monophoni-

cally. If you continue holding down the key

you first pressed, the EG will not retrigger

when you play the second and subsequent

keys. Use this setting when you want to

play legato (☞Figure 1-4).

Mono2: The timbre will play monophoni-

cally. The EG will be retriggered each time

you press a key (☞Figure 1-4).

Poly: The program will play polyphoni-

cally, allowing you to play chords. The

maximum polyphony is eight voices.

Figure 1-1: Single

Timbre1

Figure 1-2: Layer

Timbre1

Timbre2

Figure 1-3: Split

Timbre1

“SplitKey”

Timbre2

Figure 1-4: “Assgin” Mono1, Mono2

Mono 1

Mono 2

Trigger

Note on

1. VOICE

Here you can make settings that apply to the entire program, and settings that specify how each timbre will sound. Knob

[1] specifies whether you'll be using only one timbre (Single) or two timbres and how they will be used (Layer, Split, or

Multi). Here you can also specify whether the timbre currently selected by the TIMBRE SELECT keys will play mono-

phonically or polyphonically, and how it will be retriggered.

If you simultaneously press more keys than the specified number of voices, the last-pressed key will take priority.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg R3 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info