488479
44
Zoom out
Zoom in
Vorherige Seite
1/58
Nächste Seite
Sound Manager (MacOS)
40 Korg 1212 I/O
English
It will become hilighted. The 1212 I/O will now be used for input to Sound
Manager-compatible programs.
If you have multiple 1212 I/O cards installed in your computer, each card
will appear separately in the control panel. We recommend that you select
the same card for input and output.
4. Select “Sound Out” from the menu.
The Sound Out page appears, with the on-screen instruction, “Choose a
device for playback.”
5. Select the 1212 I/O icon.
It will become hilighted. The 1212 I/O will now be used for output from
Sound Manager-compatible programs.
The Sound control panel also includes an output volume setting.
6. Select “Volumes” from the menu.
7. Set the 1212 I/O’s output volume to the maximum value.
With the 1212 I/O selected in the Sound control panel, the computer will
now use the 1212 I/O for all sound input and output, including alert
sounds (the alert sound is the “beep,” or other sound, which plays when
software displays a warning message). To keep extraneous MacOS beeps
and chirps out of your digital audio system, you may wish to turn the alert
volume off entirely.
8. Optional: select “Alert Sounds” from the menu, and turn the Alert
Sound volume all the way down.
9. Close the control panel.
The Sound Manager supports only two inputs and two outputs. Using the
1212 I/O Utility, you can set the inputs and outputs to use any two of the
1212 I/O’s channels.
10. Open the 1212 I/O Utility.
11. If you have multiple cards installed, set the 1212 I/O In PCI Slot
parameter to the card selected for input and/or output.
If the current card is not selected for use with Sound Manager, the Sound
Manager Routing parameters will be inactive and grayed out. If the current
card is selected for input only, then the output parameters will be grayed
out; if it is selected for output only, then the input parameters will be
grayed out.
12. Select the desired 1212 I/O channels in the input and output menus
under “Sound Manager Routing.”
13. Set the Sample Rate, Clock Source, and Analog Input Trim
parameters as desired.
44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Korg SoundLink DRS 1212 I-O wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O Bedienungsanleitung - Deutsch - 67 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info