Bedienungsanleitung Korg X50 (Seite 94 von 132) (Englisch)

668615

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Global Mode

Linking the arpeggiator to programs

and combinations

You can specify whether the arpeggiator settings

written to a program or combination will also be

selected when you select that program or combi-

nation, or whether the arpeggiator settings will

remain in their current state when you switch the

program or combination.

When the X50 is shipped from the factory, the

former setting is selected. You can use the latter

setting if you want to use the same arpeggiator

settings to generate phrases and patterns while

you select and try out different programs and

combinations.

If the Auto Arp. “Program” or “Combination”

boxes are checked, selecting a program or combi-

nation respectively will also select the arpeggiator

settings that are written in that program or combi-

nation.

Preference Page

Recalling the last-selected mode and

page at power-on

The state of X50 when the power is turned on will

depend on the setting of “Power On Mode”.

If “Power On Mode” is set to Reset (factory set-

ting), X50 will automatically select the Combina-

tion mode 0: Play.

If “Power On Mode” is set to Memorize, X50 will

power on using the same mode and page that

were selected when the power was previously

turned off.

Protecting the memory

If one or more of the “Memory Protect” boxes are

checked, operations such as writing, loading etc.

will be prohibited for the corresponding type of

memory.

If you want to edit and write (save) settings, you’ll

need to uncheck this box. In order to load the pre-

loaded data, you’ll ﬁrst need to uncheck the Mem-

ory Protect box for the data you want to load.

Foot Page

Specifying the function of the

ASSIGNABLE Switch and ASSIGN-

ABLE Pedal

Assignable Switch

Foot SW Assign lets you assign a function to a

footswitch, such as the optional Korg PS-1, con-

nected to the rear-panel ASSIGNABLE SWITCH

jack.

• This is set by “Foot SW Assign.”

You can choose from the following functions:

Alternate modulation source

Effect dynamic modulation source

Switch portamento on/off

Control the sostenuto effect

Turn the soft pedal effect on/off

Arpeggiator on/off

Select programs or combinations (up/down)

Tap tempo

Aftertouch transmission

The functions of controllers such as the [MOD]

wheel or knobs [1]–[4]. (☞PG p.164)

Assignable Pedal

You can specify the function of an assignable

pedal, such as the optional XVP-10 EXP/VEL

pedal or EXP-2 foot controller, connected to the

ASSIGNABLE PEDAL jack.

• This is set by “Foot

Pedal Assign.”

You can choose from the following functions:

Master volume

Alternate modulation source

Effect dynamic modulation source

Portamento pitch change speed

Volume

The pan following an insert effect

Pan

Expression

Send levels to the master effects

Aftertouch transmission

Duplicate the function of another controller,

such as the [MOD] wheel or knobs [1]–[4]

(☞PG p.165)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg X50 Seite 94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info