Bedienungsanleitung Korg X50 (Seite 102 von 132) (Englisch)

668615

102

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Arpeggiator settings

For other combinations, you can press the [ARP

ON/OFF] button (the button will light) to turn

on the arpeggiator.

In Combination and Multi set, depending on

the arpeggiator A, B settings, the arpeggio

may not start when you press the [ARP ON/

OFF] button to turn it on. (☞p.96 “Select the

arpeggiator(s) that will run”)

2. As described in “Arpeggio controllers” (☞p.91)

and in “Editing arpeggio settings that appear in

the display” (below), operate the controllers or

edit the parameters to hear how the arpeggio

changes.

Note: The [ARP ON/OFF] button and the

REALTIME CONTROLS C-mode [1] (ARP-GATE),

[2] (ARP-VELOCITY), [3] (ARP-LENGTH), and [4]

(TEMPO) knobs are valid for both arpeggiators A

and B. Their state will be memorized when the

combination is written.

Editing arpeggio settings that

appear in the display

You can make arpeggiator-related settings in the

COMBI 0: Play, Arp. Play A and B pages or in the

COMBI 7: Ed–Arp/Ctrls page. The 0: Play, Arp.

Play A and B pages contain selected parameters

(taken from the 7: Ed–Arp/Ctrls, Arp. A and B

pages) that are particularly effective for editing

during a performance. However, parameters other

than “Swing” can be controlled as described in

“Arpeggio controllers” (☞p.91).

With the following exceptions, the display settings

in the 0: Play, Arp. Play A and B pages are essen-

tially the same as for a program.

1. Access the COMBI 0: Play, Arp. Play A page,

and make settings for arpeggiator A.

2. Access the COMBI 0: Play, Arp. Play B page,

and make settings for arpeggiator B.

Select the arpeggiator(s) that will run

Use the “Arpeggiator Run” check boxes to specify

the arpeggiator(s) that you want to run. The

arpeggiator(s) that are checked here will operate

when the [ARP ON/OFF] button is on.

However, the arpeggiator will play a timbre only

if the table displayed beside the check boxes

assigns arpeggiator A or B to a Timbre 1–8. These

settings are made in COMBI 7: Ed–Arp/Ctrls,

Setup page “Assign” (☞p.97).

Arpeggiator-A, Arpeggiator-B

For each arpeggiator A and B, you can make set-

tings for “Pattern,” “Reso (Resolution),” “Octave,”

“Sort,” “Latch,” “Key Sync,” and “Keyboard.”

(☞p.92)

Checking the structure of a user arpeg-

gio pattern

Let’s see how arpeggiators of the combination is

constructed.

1. Select combination C053: Echo Jamm, and look

at the Arp. Play A page and Arp. Play B page.

• As you can see from the “Timbre Assign” table

in the upper right, arpeggiator A is assigned to

timbre 4 and 8, and arpeggiator B is assigned to

timbre 2. When you play the keyboard, the Dr-

BigBeats 2 arpeggio pattern will play the pro-

gram B084: Drum’n’Bass Kit of timbre 4. The

Gt-Stab Rhythm arpeggio pattern will play the

program B108: Funkin’ Guitar of timbre 2.

• If you uncheck “Arpeggiator Run A” or

“Arpeggiator Run B,” the unchecked arpeggia-

tor will stop.

If you check it once again and play the

keyboard, the arpeggiator will begin running.

• Look at the COMBI 7: Ed–Arp/Ctrls, Scan

Zone page, and you will see that the A keys

“Btm” and “Top” are set so that arpeggiator A

will operate only for B3 and lower keys, and

that the B “Top Key” and “Bottom Key” are set

so that arpeggiator B will operate only for C4

and higher keys.

Arpeggio Pattern

Timbre AssignArpeggiator Run

Arpeggiator A/B

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg X50 Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info