Bedienungsanleitung Kraft GEH 3 P - 05174 (Seite 18 von 32) (Deutsch, Englisch, Französisch)

620517

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging thepower tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damagedor entangled cords increase the risk

of electric shock..

e) When operating a power tool outdoors, use an ex-

tension cord suitable foroutdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric

shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating apower tool. Do

not use a power tool while you are tired or under the

inuence ofdrugs, alcohol or medication. A moment

of inattention while operating power toolsmay result

in serious personal injury.

4) Power tool use and care

a) Do not force the power tool. Use the correct power

tool for your application. Thecorrect power tool will

do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn

it on and o. Any power toolthat cannot be control-

led with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/

or the battery pack from thepower tool before

making any adjustments, changing accessories, or

storingpower tools. Such preventive safety measures

reduce the risk of starting the powertool accidentally.

d) Store idle power tools out of the reach of children

and do not allow personsunfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or

binding of moving parts,breakage of parts and any

other condition that may aect the power tool’sope-

ration. If damaged, have the power tool repaired

before use.Many accidentsare caused by poorly

maintained power tools.

f) Use the power tool, accessories and tool bits etc.

in accordance with theseinstructions, taking into

account the working conditions and the work to

beperformed. Use of the power tool for operations

dierent from those intended couldresult in a hazar-

dous situation.

5) Service

a) Have your power tool serviced by a qualied repair

person using only identicalreplacement parts.

This will ensure that the safety of the power tool is

maintained.

Safety instructions Electric heater

Operation is only allowed with a safety

switch against stray current (RCD max. stray

current of 30mA).

The machine must be plugged to 230 Vwith 16

A fuse.

Switch the machine o and unplug it when unattended.

Caution: Some parts of the device may be very hot and

cause burns. Particular caution is recommended when

children and persons that must be protected are present.

Check all screw and plug-in connections and

protective equipment if rm and tightened

properly and whether all moving parts are

running smooth whenever the appliance is to be

put into operation.

The protective equipment on the appliance is

strictly prohibited to be disassembled, changed,

used in conict with the designation and it is

prohibited to attach any protective equipment of

other manufacturers.

The appliance must not be used if damaged

or safety equipment is defective. Replace any

worn-out and damaged parts.

Before use check machine, cable, and plug for any dama-

ges or material fatigue. Repairs should only be carried out

by authorised Service Agents.

• When using the appliance, it is essential to always

comply with the relevant local building and re

regulations, appropriate electrical protection and

regulations of professional associations.

• Ensure a safe distance from ammable items.

• Free air inlet and outlet must always be provided.

• Never put any foreign items into the appliance.

• The appliance must never be covered during

operation.

• The safety equipment must not be bridged or

blocked.

• The appliance must never be directly under a wall

socket during operation.

• The machine is not suitable to be installed on xed

installed power cables.

• Operate the machine only with a fully unwound

electric cable.

• Never immerse the machine in water - danger

to life!

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kraft GEH 3 P - 05174 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info