620515

Kraft GUS 650 - 05166 Seite 24

24
Zoom out
Zoom in
Vorherige Seite
1/29
Nächste Seite
Pic. 1
1. Vice
2. Drill
3. V-guide
Pic. 2
1. Knife sharpening notches
2. Scissor sharpening notch
Pic. 3
1. Hand protection
2. Magnet
3. Angle adjusting handle
4. Distance piece
Introduction
To enjoy your new multi-purpose sharpener as long as
possible, we kindly request you to carefully read the
Operating Instructions and the attached safety instructions
before putting the appliance into operation. Further, we
recommend keeping the Operating Instructions in case
you have any doubts about the multi-sharpening features
at any time later. We reserve the right to make technical
changes to improve the product in its further continuous
development.
This document includes the original Operating Instructions.
Parts of the multi-purpose sharpener
1. ON/OFF
2. Knife and scissor sharpening adapter
3. HSS drill sharpening adapter
4. Plane and chisel blade sharpening adapter
5. Mounting holes
Technical specifications
Voltage/frequency: 230V~50 Hz
Engine power: 65 W (P1 S3 15%)
Revolutions: 6,700 a min
-1
Grinding disk diameter: 48mm
(The grinding wheel must be replaced if the diameter is
less than 46 mm)
Grinding wheel thickness: 7 mm
Max. drill diameter: 10 mm
Min. drill diameter: 3 mm
Knife width: 6 mm - 51 mm
Protection class: II
Noise: L
WA
87 dB (A)
L
PA
74 dB (A)
Weight: 2,25kg
General safety instructions
When using electric devices you must follow the basic
safety regulations to prevent fire hazard, electric
shock and injury of persons including the following:
Please read and follow all instructions before putting the
appliance into operation.
Keep the safety instructions for future reference!
Safe working
Keep the place of your work clean!
Mess in the place of your work can result in injuries.
Consider the environment influences!
Do not expose the appliance to rain.
Do not use the appliance in a moist or wet environment.
Ensure appropriate lighting.
Do not use the appliance near flammable liquids or gases.
Do not use the tool when adequate lighting is not provided.
Protect yourself against electric shock!
Avoid any contact with earthed parts.
Keep other persons in a safe distance!
Do not let other persons, especially children, touch the
tool. Keep them in a sufficient distance from the place of
your work.
Store the appliance properly!
An appliance that is not used should be stored in a dry,
locked place out of reach of children.
Do not overload your appliance!
You will work better and safer at output for which the
appliance has been designed.
Use the correct appliance!
Do not use an appliance with low power for heavy work.
Do not use the appliance for purposes for which it has not
been designed.
Wear appropriate working clothes!
Do not wear loose clothes or jewels as they could be
caught by movable parts. For working outdoors, we
recommend shoes with a non-slip sole. Wear a hairnet if
your hair is long.
Use protective aids!
Protective glasses should always be worn. Use a breathing
mask when working in a dusty environment.
Do not use the cable for any other purposes than for
which it has been designed!
Do not use the cable for pulling the plug out of socket;
protect it against excess temperatures and sharp edges.
Secure the processed workpiece!
To secure the processed material, use a clamping device
or a vice. Materials will be secured better this way than
using your hand.
Avoid abnormal body posture!
Make sure you are stable to keep balance at all times.
Care for your tools!
Keep the tools sharp and clean; you will be able to work
better and safer. Follow the maintenance regulations and
tool replacement instructions. Check the tool cable
regularly and have it replaced by an authorised specialist if
damaged. Check the extension cable regularly and replace
it if damaged. Keep the handles dry, with no signs of oil
and grease.
Pull the plug out of socket!
When not using the appliance, before maintenance or
when replacing the grinding disk.
Never leave tools that are switched on in the
appliance!
Make always sure all wrenches and adjusting tools have
been removed before switching the appliance on.
Prevent unintentional appliance switch-on!
Make sure the switch is in the “off” position when plugging
the appliance. Do not carry the tool with your fingers on
the switch.
Extension cable for outdoor use:
Authorised extension cables with appropriate marking
must only be used outdoors.
Pay attention!
Pay attention to what you are doing. Use common sense
when working. Do not use the appliance when you are
tired.
24
… 24 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

kraft-gus-650---05166

Suche zurücksetzen

  • wo bekomme ich eine ersatzteilliste für GUS 650 her Eingereicht am 2-2-2017 13:42

    Antworten Frage melden

  • ich brauche eine ersatzteilliste für Gus 650 wo bekomme ichdiese Eingereicht am 2-2-2017 13:40

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kraft GUS 650 - 05166 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info