508528

Kranzle Therm 1165 Seite 8

8
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
Description
The thermostat controls the temperature of the
spray water. The target temperature is set using
two press-buttons (nos. 3 + 4) and can be read
from the top display (no. 1). If a button is held
down for longer, the target temperature setting
increases quickly in increments of 5°C.
The last temperature setting used remains
stored after the machine is switched off and
automatically becomes the default temperature
when the machine is switched back on.
The current spray temperature can be read from
the bottom display (no. 2).
When the machine is switched on, both displays show the figure "888" for approx 1
second to check the functioning of the units.
The thermostat also monitors the fuel level in the tank by means of a float switch. If
the fuel level falls below the minimum required quantity, the thermostat switches the
oil burner off and the word "OIL" blinks in the target temperature display window (no.
1). If the top display shows the letters "FLA" this indicates a malfunction in
combustion.
Thermostat
2
3
4
1
Safety information
IMPORTANT!
For safety reasons, the master switch must be put in the "0" position (ie,
the power must be switched off) after the washing process has been
completed.
At the start of the washing process the high pressure stream must be directed for at
least 30 seconds at the object being cleaned. It is possible for the water content
(approx. 5 l) of the combustion chamber to discolour during periods of disuse.
Description
The thermostat controls the temperature of the
spray water. The target temperature is set using
two press-buttons (nos. 3 + 4) and can be read
from the top display (no. 1). If a button is held
down for longer, the target temperature setting
increases quickly in increments of 5°C.
The last temperature setting used remains
stored after the machine is switched off and
automatically becomes the default temperature
when the machine is switched back on.
The current spray temperature can be read from
the bottom display (no. 2).
When the machine is switched on, both displays show the figure "888" for approx 1
second to check the functioning of the units.
The thermostat also monitors the fuel level in the tank by means of a float switch. If
the fuel level falls below the minimum required quantity, the thermostat switches the
oil burner off and the word "OIL" blinks in the target temperature display window (no.
1). If the top display shows the letters "FLA" this indicates a malfunction in
combustion.
Thermostat
2
3
4
1
Safety information
IMPORTANT!
For safety reasons, the master switch must be put in the "0" position (ie,
the power must be switched off) after the washing process has been
completed.
At the start of the washing process the high pressure stream must be directed for at
least 30 seconds at the object being cleaned. It is possible for the water content
(approx. 5 l) of the combustion chamber to discolour during periods of disuse.
The thermostat controls the temperature of the
spray water. The target temperature is set using
two press-buttons (nos. 3 + 4) and can be read
from the top display (no. 1). If a button is held
down for longer, the target temperature setting
increases quickly in increments of 5°C.
The last temperature setting used remains
stored after the machine is switched off and
automatically becomes the default temperature
when the machine is switched back on.
The current spray temperature can be read from
the bottom display (no. 2).
When the machine is switched on, both displays show the figure "888" for approx 1
second to check the functioning of the units.
The thermostat also monitors the fuel level in the tank by means of a float switch. If
the fuel level falls below the minimum required quantity, the thermostat switches the
oil burner off and the word "OIL" blinks in the target temperature display window (no.
1). If the top display shows the letters "FLA" this indicates a malfunction in
combustion.
Thermostat
2
3
4
1
Safety information
IMPORTANT!
For safety reasons, the master switch must be put in the "0" position (ie,
the power must be switched off) after the washing process has been
completed.
At the start of the washing process the high pressure stream must be directed for at
least 30 seconds at the object being cleaned. It is possible for the water content
(approx. 5 l) of the combustion chamber to discolour during periods of disuse.
8
… 8 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kranzle Therm 1165 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kranzle Therm 1165

Kranzle Therm 1165 Bedienungsanleitung - Deutsch - 25 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info