Bedienungsanleitung Kranzle Therm 872 E-M 48 (Seite 5 von 31) (Englisch)

508542

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Range of application

This machine may only be used for cleaning facades, vehicles, containers, pavement

slabs, stables, machines and similar objects.

Inspections

The machine must be inspected according to the “Guidelines for Liquid Spray Devices” at

least once every 12 months by a qualified person, to ensure that continued safe

operation is guaranteed. The results of the inspection are to be recorded in writing. This

may be done in any form. For inspection reports see pages 54/57.

High-pressure cleaners used for commercial purposes have to be

checked by a qualified person at least every 12 months!

Accident prevention

The machine is designed for accidents to be impossible (if used according to these

instructions). Please read safety notes included in these instructions carefully before using

the machine and act correspondingly. Operating staff has to be instructed according to

this manual. The “Guidelines for Liquid Spray Devices” must be complied with.

Setting up - Location

Neither set up and operate the machine in rooms where there is a risk

of fire or explosion nor put it into puddles. It is prohibited to use the

machine under water.

Do not jam the trigger of the gun during operation!

When carrying through service and maitenance tasks the machine has

to be cut off the power supply system. Put main switch to "0" and pull

plug out of socket

Never operate the machine if cables or other safety-relevant parts (e.g.

excess pressure valve, high-pressure hose, spraying devices, etc.) are

defective.

General rules

Safety notes

Never operate the machine without supervision. The machine may only

be operated by persons who have been instructed accordingly.

Some parts inside the machine, all water conducting components and all

metal parts of gun and lance are hot during hot water operation. Keep all

hoods and protective covers closed during operation and never touch

any metal parts of gun or lance.

Persons operating the machine should wear the necessary protective

clothing, i.e. waterproof clothing, rubber boots, safety goggles, headwear

etc. It is prohibited to use the machine in close vicinity to people lacking

suitable protective clothing.

The high pressure spray can generate a high level of noise. If noise

exceeds the maximum allowed levels, users and others in the vicinity

must wear suitable ear protection

Do not spray against matter containing asbestos or other hazardous

substances.

For safety reasons always switch the main switch to "0"- postion after

having finished the cleaning task (disconnection from power supply).

Bear in mind that during cleaning tasks

with a high-pressure water jet a significant

recoil at the lance arises.

Additionally angled lances produce a

clearly perceivable amount of torque.

Apply the safety catch on the spray gun

after each use, in order to prevent

unintentional spraying!

Always aim the underbody lance! Bear in

mind when using a curved or angled

spraying lance that there is a significant

amount of torque in the recoil!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kranzle Therm 872 E-M 48 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kranzle Therm 872 E-M 48

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info