Bedienungsanleitung Kranzle therm-RP 1400 (Seite 19 von 29) (Englisch)

716909

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

36 37

Taking out of operation

1. Switch off the high-pressure cleaner

2. Cut off the water supply

3. Open the safety trigger gun catch briefly until the pressure is released

4. Apply safety catch on the trigger gun

5. Remove high-pressure hose and safety trigger gun

6. Emptying high-pressure pump: Hold high-pressure hose and switch

motor on until water jet stops escaping at the outlet.

7. Pull the plug from the socket

8. Clean high-pressure hose and wind up without loops, fix hose drum

9. Clean and wind up the power supply cable

10. Clean the water inlet sieve

11. Apply locking brake

12. Store high-pressure cleaners in frost-free rooms in winter

Particular rules, directives and inspections

Inspections performed by Kränzle

- Measurement of earth line resistance

- Measurement of voltage and current

- Inspection of tension consistency with +/- 1530 V

- Pressure check of heating coil at 300 bar

- Visual and functional check as per the inspection sheet provided

- Exhaust fume analysis (see test strips provided)

Guidelines for liquid sprayers

The machine conforms with the "Guidelines for liquid sprayers". These guidelines

are issued by the organisation of trade associations and may be obtained from

Carl Heymann-Verlag KG, Luxemburger Str. 49, 50939 Köln. These guidelines

specify that this machine is to be inspected by qualified personnel whenever

necessary, but no less than once every 12 months. These inspections must be

recorded in the inspection log at the end of this manual.

Pressure container and steam boiler directives

Kränzle high-pressure cleaning equipment conforms to the pressure container

and steam boiler directive. No construction approval, notification of licence

and takeover inspection are required. The water capacity is less than 10 l.

Duties of owner

The owner is to ensure that all safety-relevant components are in a serviceable

condition before the sprayer is used. (e.g., safety valves, hose and electric cables,

spray equipment etc.)

Emission control legislation

With stationary installation, the emission levels of the machine must be

checked once a year by a qualified organisation or person according to German

law. The

first inspection must be carried out four weeks after the machine is

commissioned.

The owner is responsible for having the inspection performed.

Frost protection

For protecting the high-pressure cleaner against frost please empty it completely.

Separate high-pressure cleaner from water supply and switch it on. By opening

the safety trigger gun the high-pressure pump presses water out of the water

tank. However, do not allow the high-pressure cleaner to operate without

water for more than one minute. Fill the anti-freeze agent into the water box

and turn on the high-pressure cleaner. Wait with opened gun until the agent

spurts out of the nozzle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kranzle therm-RP 1400 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kranzle therm-RP 1400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info