Bedienungsanleitung Kranzle X A17 TST (Seite 9 von 19) (Englisch)

716880

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

16 17

Motor protection switch

Motor is protected against overload by means of a motor protection switch.

In case of motor overload or blocking, the motor of the high pressure cleaner

switches off automatically. If motor tends to switch off repeatedly, make sure

to detect appears. Make sure to detect and remedy the cause of the failure.

Replacements and inspection work should only be performed by

qualified persons when the high pressure cleaner is disconnected from

the power supply, i.e. with plug pulled out from the electrical socket.

Totalstop system

The X-series features a totalstop system. If the main switch is switched on, the

motor is started via a pressure switch when opening the safety trigger gun. When

closing the safety trigger gun the motor is switched off immediately.

High pressure hose and spray device

The high pressure hose and spray device which are part of the X-series

equipment, are made of high quality material and engineered to conform with

the operating conditions of the high pressure cleaner and are duly labeled.

If replacement parts are required, only such parts that are authorized

by the manufacturer may be used. The warranty is automatically void if

spare parts of third-party providers are used! The high pressure hose and

spray device must be connected in a pressure-tight manner

(without leakage).

The high pressure hose may not be driven over, pulled excessively, or

twisted. The high pressure hose may under no circumstances be pulled

over sharp edges. Defective high pressure hoses must not be repaired

(acc. to DIN 20022) but have to be replaced by new hoses approved by

the manufacturer.

Prior to putting the high pressure cleaner into operation make sure

that all safety instructions be observed.

Water and cleaning system

Water must be supplied to the high pressure pump under pressure or

(only for high-

pressure cleaner X A15 TST)

directly sucked

in out of a pressureless container. The

water is then forced under pressure by the high pressure pump to the lance. The

high pressure jet is formed by the nozzle at the end of the lance.

Environmental, refuse disposal and water protection regulations

must be observed!

Safety jet pipe with safety trigger gun

The high-pressure cleaner can only be operated when the trigger of the safety

deactivation trigger gun's trigger is actuated. When the trigger is pulled, the sa-

fety deactivation trigger gun opens. The liquid is then transported to the nozzle.

The spray pressure increases and quickly reaches the operating pressure. When

the trigger is released, the safety deactivation trigger gun closes and any further

spraying of liquid from the safety jet pipe is prevented. The pressure gauge must

show "0" bar. The increase in pressure when the safety deactivation trigger gun

is closed causes the pressure control valve-safety valve to open. The motor is

switched off by the pressure switch. When the trigger gun with safety catch is

opened, the pressure control valve - safety valve closes, the motor is started and

the high-pressure pump resumes pressure spraying from the safety jet pipe with

the selected operating pressure.

The safety trigger gun is a safety device. Repairs should only be

performed by qualified persons. Should replacement parts be required,

use only components authorized by the manufacturer.

Pressure control valve/safety valve

The pressure control valve/safety valve protects the high pressure cleaner from

a build up of excess pressure, and is designed not to permit an excess pressure

to be selected for operation. The limit nut on the handle is sealed with a spray

coating. The operating pressure and spray rate can be steplessly adjusted by

turning the handle.

Replacements, repairs, new adjustments and sealing should only be

performed by qualified persons.

Functional details Functional details

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kranzle X A17 TST Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kranzle X A17 TST

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info