Bedienungsanleitung Kratki Amelia (Seite 17 von 136) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

813976

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

combustion. During combustion, the front door of the replace insert must be closed. During the nal

phase of the combustion cycle, the air damper must be opened 100% to allow the remaining fuel to

burn out. Re-loading should be done only when only the ignition layer in the form of embers remains

in the replace. The intensity of the fuel combustion process in the replace insert should be regulated,

as long-lasting maintenance of maximum combustion temperatures can lead to overheating of sen-

sitive replace components and their damage. Controlling the combustion process also reduces fuel

consumption, as it lengthens the combustion cycle, and ensures optimal use of energy. The principle

of operation of all dampers used in the various series of replace inserts is shown in Figure 3 (A - air

damper, B - air curtain damper, C - injection air damper, D - shaft, 1 - open position, 2 - closed position).

Ash removal / Caution

We empty the replace of ash only after it has cooled down beforehand. Note that the ash accumula-

ted in the combustion chamber may remain hot even several hours after the replace is extinguished.

Use protective gloves during this activity.

When draining the replace, the accumulated ash should be removed with a metal scoop into a non-

-ammable container. In the case of replace inserts equipped with an ash pan, it should be emptied

using protective gloves. It is necessary to regularly check the level of lling the rebox with ash, becau-

se if there is an excess of ash, the supply of combustion air is reduced.

In addition, in appliances with a grate with an ash pan, excess ash restricts the cooling process of

the grate, which consequently damages it. In addition, leaving ash in the ash drawer for an extended

period will cause chemical corrosion of the ash pan.

Extinguishing the insert in case of chimney re and replace failure

In cases of slow combustion and burning of wood with high moisture content, organic combustion

products (soot and steam) are formed in excess, forming creosote in the ue, which can ignite. In such

a case, rapid combustion (high ame and high temperature) occurs in the ue pipe - referred to as a

chimney re. In the event of such a phenomenon, cut o the air supply to the appliance and close

the sunroof if it is installed. Then check the correct closure of the door and notify the nearest re de-

partment.

In the event of a replace insert malfunction, open the replace door to cool the combustion chamber

as quickly as possible. This operation should be done by rst opening all the windows in the room

where the insert is installed. If necessary, the re can be extinguished with a replace extinguisher

or sand. Under no circumstances should the replace be ooded with water. Excess burning fuel can

also, with special precautions, be placed in a non-ammable container and taken outside the building.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kratki Amelia Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info