Bedienungsanleitung Kratki ANTEK 8 (Seite 17 von 100) (Deutsch, Englisch, Französisch, Polnisch)

694592

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

In accordance with these principles:

• The replace insert with water jacket should be installed on a minimum 15 cm thick-incombustible

surface. The easily combustible oor near the replace door must be protected with a minimum

30cm wide-strip of incombustible material reaching at least 30 cm away from the edges of doors

on each side.

• The replace insert with water jacket, connecting pipes and openings for cleaning should be away

from the unprotected easily combustible parts of a building, at a distance of at least 60 cm and from

the ones protected by 25mm-thick-plaster or other equivalent lining - at least 30cm.

• The room where the replace insert with water jacket is installed fresh air inow must be ensured

for burning fuel in the replace and for ventilation.

• The ue gas ducts and smoke ducts as well as ventilation ducts in the room where the replace with

water jacket will be installed must be made of certicated non-combustible materials.

(vary from country to country).

4.2. Assembly principles of the ue gas extraction system

The primary condition of safe and economic operation of the replace insert with water jacket is the

chimney ue in working order and appropriately selected in terms of cross section. The technical

condition of the chimney should be assessed by a chimney sweeper. The chimney ue should be free

from connections of other appliances.

The section of the chimney is determined acc. to the following formula:

F = 0,003 x [m

], where

F - section of the chimney [m

Q - rated thermal power of the replace insert [kW],

h - chimney height [m].

The vent connector of the replace insert with water jacket should be connected to the chimney by

means of a steel pipe, made of certicated material, that should be placed on the vent connector

outlet and settled in the chimney.

The chimney should be made on non-combustible materials enabling the maintenance of constant

temperature. Otherwise the chimney should be lined with an isolative material or a two-jacket-chim-

ney should be installed (in the part protruding over the roof). The chimney and chimney ues should

be tested for air-tightness, no leaks are permissible. The chimney may have a circular or square section

with the cross section not smaller than 14 x 14 cmor diameter

Ø150 mm for replaces with fume outlet

size up to 0.25 m 2 in the case of larger fume outlet size, chimney dimension 14 x 27 cm or diameter

Ø180 mm. The section of the chimney ue should be the same all along its he ight, there should be no

sudden narrowings or ue gas ow direction changes. Only one heating appliance may be connected

to one chimney ue.

4.3. Assembly principles of the central heating system

√

NOTE: The replace inserts with water jackets within the territory of Poland are designed to works as

a source of heating in the gravitational or pump water heating system of the open system secured

in accordance with PN-91/B-02413 standard, in which the permissible water temperature does not

exceed 100°C, the permissible working pressure is not higher than the pressure for the applainces

used, the circulating water can be used exclusively for heating purposes and cannot be collected from

the system.

The replace insert with water jacket should be connected with the central heating system by means

of pie union joints or collars. The replace and central heating system should be relled with water

outside the area of the replace insert (not closer than 1.0m) on the return water duct.

The installation and commissioning of the replace insert with water jacket should be carried

out by a qualied assembly team.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kratki ANTEK 8 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info